G3 HM Series 30-40W Pulsed Fiber Lasers - SPI Lasers - #1

Text version of the page

www.spilasers.com ©2009 SPI Lasers UK Ltd SM-S00092_B SPI Lasers UK Ltd, 3 Wellington Park, Tollbar Way, Hedge End, Southampton SO30 2QU, UK UK office: +44 (0)1489 779 696 SPI Lasers LLC, 1700 Wyatt Drive, Suite 1 Santa Clara, CA 95054 US office: +1 408 884 3090 Features - 20kW nominal peak power with up to 38W average output power - Up to 500 kHz pulse repetition frequency - Pulsed and CW operation - First and last pulse equally useable - High speed marking compatible (2000 cps) - Bitmap marking compatible - Pulse width variable (across 25 pre-set waveforms) - Maximized peak power over full operational repetition rate - High reliability/repeatability/stability design - Analogue power control input, pulse gate, and pulse trigger - Hardware-only interface or simple RS-232 software control - Status monitoring and safe shut down Applications Marking „h Plastics „h Metals „h Poly-compounds Scribing Ablation Silicon Processing Solar Cell Processing ITO Removal Thin film cutting Fine foil drilling Dual head marking The redENERGY™ G3 fiber laser platform uses SPI’s innovative PulseTune technology that offers the OEM integrator highly flexible control over pulse width and peak power for deployment in multiple applications. The unique PulseTune function on the HM/HS models enables market leading repetition rates whilst maintaining peak power threshold. These products are designed to address the majority of laser-marking and micromachining applications with peak powers up to 20kW. By enabling high repetition rates this product is high speed marking compatible out of the box – plus with the added function of a CW mode of operation - bitmap marking is just plug and play. It is an easyto- integrate DC-powered OEM fiber laser module with integral controller designed to interface with common laser-marking equipment. The HM offers an extension in power to SPI’s range of pulsed laser products with an M² of approximately 3.2 giving wider marking lines and more even ablation. G3 HM Control Interfaces Software interface (RS-232 control) �œ Hardware interface (PC-free operation) �œ Modes of Operation Pulsed �œ CW mode �œ Pulse Characteristics Selectable pulse waveforms �œ 1 - 500 kHz pulse rate �œ Integrated controller �œ Fast rise-time �œ Temperature correction �œ General Features Pump recalibration facility �œ Operating Temperature Range 55°C base plate (40°C ambient) �œ G3 HM Series 30-40W Pulsed Fiber Lasers With GTWave™ and PulseTune Technology