SPECTRUM SYSTEMENTWICKLUNG MICROELECTRONIC GMBH · AHRENSFELDER WEG 13-17 · 22927 GROSSHANSDORF · GERMANY 11.6.10
PHONE: +49 (0)4102-6956-0 · FAX: +49 (0)4102-6956-66 · E-MAIL: info@spec.de · INTERNET: http://www.spec.de
MX.61xx - 2 channel 125 MS/s Arbitrary Waveform Generator
PXI 3U / CompactPCI 3U format
Fast 8 bit arbitrary waveform generator
2 simultaneous channels
Output up to ± 3 V in 50 Ohm
Amplifier option available for ±10 V
Offset and amplitude programmable
3 software selectable filters
Up to 128 MSample memory
FIFO mode
Synchronization possible
Software SPEasyGenerator included
Product range overview
Software/Drivers
A large number of drivers and examples are delivered
with the board or are available as an option:
Windows 98/ME/NT/2000/XP/Vista/7 drivers
Linux 32bit and 64bit drivers
SBench 5.x for Windows
Microsoft Visual C++ examples
Borland Delphi examples
Microsoft Visual Basic examples
Microsoft Excel examples
LabWindows/CVI examples
FlexPro support with SBench
LabVIEW - drivers (as option)
DASYLab - drivers (as option)
MATLAB - drivers (as option)
Agilent VEE - drivers (as option)
General Information
With the
PXI board MX.6110 it is possible to generate
free definable waveforms on two channels synchronously.
The board works on channels with a synchronous
sampling rate of 125 MS/s. The internal
standard Sync-bus allows the setup of synchronous
multi channel systems with higher channel numbers. It
is also possible to combine the arbitrary waveform generator
with other boards of the MX product family
like analogue or digital acquisition boards.
With the up to 128 MSample large on-board memory
long waveform can be generated even with high sampling
rates. The memory can also be used as a FIFO
buffer to make continuous data transfer from PC memory
or hard disk.
Model 1 channel 2 channels
MX.6110 125 MS/s 125 MS/s
Hardware block diagram
Software programmable parameters
sampling rate 1 kS/s to max sampling rate, external clock, ref clock,
PXI clock
Output amplitude ±100 mV up to ±3 V in 1 mV steps (Amp option: ±333 mV up to ±10 V)
Output offset ±3 V selectable in 1 mV steps (Amp otpion: ±10 V in 3 mV steps)
Filters no filter or one of 3 different filters as defined in technical data section
Mode Singleshot, Continuous, Standard, Bank Switching
Clock mode internal PLL, internal quartz, external, external divided, external reference
clock,
PXI reference clock
Clock impedance 50 Ohm / high impedance (> 4 kOhm)
Trigger impedance 50 Ohm / high impedance (> 4 kOhm)
Trigger mode External, Software,
PXI Line[5..0],
PXI Startrigger
Memory depth 32 up to installed memory in steps of 32
Posttrigger 32 up to 128 M in steps of 32
Multiple Replay segmentsize 32 up to installed memory / 2 in steps of 32
