SPI 2012 e-Catalogue: PC
14Pages

{{requestButtons}}

Catalog excerpts

SPI 2012 e-Catalogue: PC - 1

ATX Form Factor Afif Full Range (1) +3.3V & 5V total output must not exceed 97W (2) 3.3V, +5V, +12V1, & +12V2 total output must not exceed 234W Full Range 1) +3.3V &+5V total output not exceed 97W. 2) Maximum combined current for the +12V outputs shall be 20A. 3) +12V2 Peak current is 18A (less than 10m Sec), minimum voltage during peak is >1 lOVdc. 4) +5Vsb Peak current is 2.5A (less than 500m Sec), minimum voltage during Full Range 1) +3.3V &+5V total output not exceed 97W. 2) Maximum combined current for the +12V outputs shall be 20A. 3) +12V2 Peak current is 18A (less than 10m Sec), minimum voltage during peak is >1 LOVdc 4) +5Vsb Peak current is 2.5A (less than 500m Sec), minimum voltage during Full Range (1) +3.3V & +5V total output must not exceed 97. When +5V is loaded to 15A, then +3.3V maximum load is 6.67A. When +3.3V is loaded to 14A, then +5V maximum load is 10.16A. (2) +12V1 & +12V2 total output must not exceed 240W(20A) (1)+3.3V&+5V total output must not exceed 105W(2) 3.3V, +5V, +12V1, (1)+3.3V&+5V total output must not exceed 105W(2) 3.3V, +5V, +12V1, +12V2 total output must not exceed 264W Full Range UL/cUL, TUV, CE, FCC I +12V2 total output must not exceed 282W 80mm Full Range UL/cUL, TUV, CE, FCC + 12V2 total output must not exceed 300W Full Range 1) +3.3V& +5V total output not exceed 105W. 2) Maximum combined current for the + 12V outputs shall be 24A. 3) +12V2 Peak current is 18A (less than 10m Sec), minimum voltage during peak is >1 LOVdc 4) +5Vsb Peak current is 3.5A (less than 500m Sec), minimum voltage during Photos are for reference purpose only. All contents are suject to change without prior notice

Open the catalog to page 1
SPI 2012 e-Catalogue: PC - 2

Full Range 1) +3.3V& +5V total output not exceed 105W. 2) Maximum combined current for the + 12V outputs shall be 24A. 3) +12V2 Peak current is 18A (less than 10m Sec), minimum voltage during peak is >1 lOVdc. 4) +5Vsb Peak current is 3.5A (less than 500m Sec), minimum voltage during Full Range (1) +3.3V & +5V total output must not exceed 103W (2) +12V1 & +12V2 total output must not exceed 252W Full Range (1) +3.3V & +5V total output must not exceed 90W. When +5V is loaded to 16A, then +3.3V maximum load is 3A. When +3.3V is loaded to 16A, then +5V maximum load is 7.4A. (2) +12V1 & +12V2...

Open the catalog to page 2
SPI 2012 e-Catalogue: PC - 3

(1) +3.3V & +5V total output must not exceed 150W (2) +12V1 & +12V2 total output must not exceed 348W Full Range . +12V2 total output must not exceed 382W + 12V2 total output must not exceed 400W 1 ) +3.3V& +5V total output not exceed 120W 2 ) Maximum combined current for the + 12V outputs shall be32A 3) +12V2 Peak current is 18A (less then 10m Sec.), minimum voltage during peak is >1 lOVdc 4 ) +5Vsb Peak current is 3.5A(less then 500m Sec.), minimum voltage 1 ) +3.3V& +5V total output not exceed 120W 2 ) Maximum combined current for the + 12V outputs shall be32A 3) +12V2 Peak current is...

Open the catalog to page 3
SPI 2012 e-Catalogue: PC - 4

«+5V total output must not «+5V total output must not exceed 145W (2) +12V1 & +12V2 total output must not exceed 360W exceed 120W (2) +12V1 & +12V2 total output must not exceed 360W : +5V total output must not exceed 130W. When +5V is loaded to 24A, then +3.3V maximum load is 3A. When +3.3V is loaded to (2) +12V1 & +12V2 total output must not exceed 420W(35A) : +5V total output must not exceed 85W. When +5V loading is at 16A, then +3.3V maximum load is 1.5A. When +3.3V loading is at (2) +12V1 & +12V2 total output must not exceed 408W (34A). Model Watts (1) +3.3V & +5V total output must not...

Open the catalog to page 4
SPI 2012 e-Catalogue: PC - 5

(1) +3.3V & +5V total output must not exceed 120W (2) +12V1 & +12V2 total output must not exceed 408W 1) +3.3V& +5V total output not exceed 155W2) Maximum combined current for the +12V outputs shall be 36A. 3) +12V2 Peak current is 19A (less than 10m Sec), minimum voltage during peak is >11 .OVdc. 4) +5Vsb Peak current is 3.5A(less than 500m Sec), minimum voltage during peak is (1) +3.3V & +5V total output must not exceed 130W. When +5V is loaded to 24A, then +3.3V maximum load is 3A. When +3.3V is loaded to 24A; then +5V maximum load is 10A. (2) +12V1 & +12V2 total output must not exceed...

Open the catalog to page 5
SPI 2012 e-Catalogue: PC - 8

PC Dimension(L*W*H): 140*150*86 (mm) Model SPI700ACH5B +3.3V +5V Min. 0.8A 0.5A 1A 1A 1A 1A 0A 0.1A Max. 36A 30A 18A 18A 18A 18A 0.8A 3.0A Watts 700W +12V1 +12V2 +12V3 +12V4 -12V +5Vsb Fan Input Voltage Safety 120mm Full Range UL/cUL, TUV, CE, FCC Full Range UL/cUL, TUV, CE, FCC 1) +3.3V & 5V total output should not exceed 155W. 2) Total output for this subjected power supply is 700W. SPI700ACAG 700W Min. 0.1A 0.2A 0.1A 0A 0A 0A 0A 0A Max. 28/6A 13.5/28A 18A 18A 18A 18A 0.5A 3.5A 120mm (1) +3.3V & +5V total output must not exceed 160W. When +5V is loaded to 28A, then +3.3V maximum load is...

Open the catalog to page 8
SPI 2012 e-Catalogue: PC - 9

PC SPI850ACHBB SPI900GCM SPM1200AXJ8 SPI250S8H8 850W Model SPI850ACHBB Dimension(L*W*H): 140*150*86 (mm) +3.3V +5V +12V1 +12V2 +12V3 +12V4 Min. 0.8A 0.5A 0.5A 0.5A 0.5A 0.5A 0A 0.1A Max. 30A 30A 20A 20A 20A 20A 1A 3.0A Watts 850W -12V +5Vsb Fan Input Voltage Safety 120mm Full Range UL/cUL, TUV, CE, FCC 1 ) +3.3V & 5V total output not exceed 175W 2 ) +3.3V & 5V & +12V outputs power should not exceed 825W 3 ) +5VSB& -12V outputs power should not exceed 25W 4 ) maximum combined current for the 12V outputs shall be 66A 5 ) total output for this subject power supply is 850W watts SPM850ACHBB...

Open the catalog to page 9
SPI 2012 e-Catalogue: PC - 10

Model Watts Full Range (1) +3.3V & +5V total output must not exceed 21OW (2) Maximum combined current for 12V output is 90A (4) Total output power for the power supply Full Range UL/cUL, TUV, CE, FCC (1) +3.3W & +5V total output must not exceed 160W (2) Maximum combined current for 12V output is 100A (3) Total output power for the power Micro ATX Form Factor Afif Full Range (1) +3.3V & +5V total output must not exceed 85W (2) Total output continuous shall not exceed 200W (3) +12V peak current is 17A (less than 17m sec), minimum voltage during peak is >10.8Vdc (4) +5V peak current is 28A...

Open the catalog to page 10

All Sparkle Power catalogs and technical brochures

  1. FSP220-60MPC

    1 Pages

  2. SPI600A8BMB

    1 Pages

  3. SPI600A8BB

    1 Pages

  4. SPI270LE

    1 Pages

  5. SPI300F4BB

    1 Pages

  6. FSP600-502UQ

    1 Pages

  7. SPT300PFB

    1 Pages

  8. FSP200-50GHS

    1 Pages

  9. FSP250-70MU

    1 Pages

  10. FSP600-92MPB

    1 Pages

  11. SPI700A8BB

    1 Pages

  12. FSP250-70PFU

    1 Pages

  13. FSP700-50DRS

    1 Pages

  14. FSP180-50PLA

    2 Pages

  15. SPI400F4BG

    1 Pages

  16. FSP500-501UN

    1 Pages

  17. SPI500U4BG

    1 Pages

  18. SPI750ACAG

    2 Pages

  19. SPI650ACAG

    2 Pages

  20. SPI450ACAG

    2 Pages

  21. SPI400ACAG

    2 Pages

  22. SPI300A8AG

    1 Pages