IBC SLX 820 - Sotralentz - #1

Text version of the page

Untitled table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:5.00pt "Arial", sans-serif; } .font1 { font:10.00pt "Arial", sans-serif; } .font2 { font:10.50pt "Arial", sans-serif; } .font3 { font:18.00pt "Arial", sans-serif; } .font4 { font:10.00pt "Sylfaen", serif; } .font5 { font:4.00pt "Tahoma", sans-serif; } .font6 { font:5.00pt "Tahoma", sans-serif; } .font7 { font:7.00pt "Tahoma", sans-serif; } .font8 { font:16.00pt "Tahoma", sans-serif; } .font9 { font:29.00pt "Tahoma", sans-serif; } 820 litres, IBC SLX 820 IBC 10 A-V 4 IBC SLX 820 is intended to contain products with a maximum density of 1.9, except with the interstackable wooden pallet where maximum density is 1.4 v IBC SLX 820 is suitable for storage, handling and transportation of chemicals products, foodstuffs. IBC SLX 820 optimizes, storage, handling, and transportation of your products compared to other packaging. v IBC SLX 820 is fitted with a 820 litres high density polyethylene (HDPE) bottle made by extrusion blow moulding, a valve screwed into the bottom outlet, a pallet and a protective wire cage. Standard bottle colour, translucent. MARKING PLATE Standard (width ; 331, height ; 390 mm) Large (width ; 667, height ; 390 mm) Galvanised steel ManuLogos BOTTLE CAP 0 150mm or 0 220mm Colour Black Manufacturing process injection moulding Raw material HDPE Closing torques - 0 150, 50 / 70 Nm - 0 220, 80 / 100Nm Remarks - Balance vent, degas / regas vent, or quick emptying system are with protective cap. - Tamper evident system available. — Raw material Remarks Standard version one in the front, additional marking plates are optional. UN version, standard or large plate in the front and in the back of the IBC, additional plates are optional. Front plate with traceability and UN label. Bar code type EAN 13 available. PROTECTIVE WIRE CAGE Welded steel wire mesh Manufacturing process Automatic welding Silver grey CORNERS PROTECTORS Colour Only for UN IBC Black Colour Raw material HDPE Remarks Anti corrosion treatment, coated with epoxy polyester. optional protective gate HDPE Manufacturing process injection moulding BOTTOM OUTLET Raw material 2" butterfly valve HDPE Manufactured date of the bottle and, assembly date of the IBC. HDPE, SOTRALENTZ Emballage. Colors white or black Manufacturing process injection moulding injection moulding PALLET Metal Plastic Wood Rackable, stackable, interstackable. yes yes it depend the model Perimetric yes No No No-perimetric No yes yes Raw material Galvanised steel HDPE Wood Manufacturing process stamped and welded injection moulding assembly Remarks Wooden pallet, heat treatment IPPC 15 available. Métal pallet Interstackable ^—^^^^5 wooden pallet Remarks Butterfly valve components : Triple security on the valve, red security pin on the lever, aluminium/PE tamper evident seal welded to valve outlet and end cap with seal. Valve seals, EPDM or VITON, in case of doubt please contact us. Serial number on the valve body. 3" inch valve available, please consult us. SOTRALENTZ Packaging valves brochure, available on : www.sotralentz.com 4 Approval(s) : v For land, sea or air transport of dangerous liquids of packing group II or III, for products with a density not greater than 1.9. v In accordance with UN recommendations and the derivative modal regulations : RID/ADR, IMDG code. 4 Nominal capacity : v 820 litres (-0 +6%),(total brimful capacity, 845 litres). 4 Recommended maximum stacking for filled IBC's : (B) : interstackable wooden pallet. (A) : other pallets. Maximum stacking with a plastic pallet : 2 on 1 if density product less than (<) 1.4 1 on 1 if density product greater than (>) 1.4 4 Weights and dimensions, in mm : FRONT SIDES TOP Weights depend, of the pallet 3 kg) Dimensions (+/- 10 mm) Metal Plastic Wood Length Width Height 59,0 kg 64,0 kg 60,0 kg 1200 mm 1000 mm 980 mm 4 Quantités livrées par types de transports : 1 in dynamic load If density product is: greater than (>) 1.4 (A) greater than (>) 1.2 (b) 1 on 1 in dynamic load If density product is : less than (<) 1.4 (A) less than (<) 1.2 (b) 2 on 1 (B et A) or 3 on 1 (A) in static load On a perfect flat ground 2 on 1 if density product greater than (>) 1.4 3 on 1 if density product less than (<) 1.4 1 Transport 120 m3 truck 70m3 truck ISO 40" container ISO 20" container Quantity 90 IBC's 32 IBC's 44 IBC's 20 IBC's SDTRALENTZ EMBALLAGE