Wheelprobe and Sensors
4Pages

{{requestButtons}}

Catalog excerpts

Wheelprobe and Sensors - 2

The single element wheel probe uses Sonatest NDTS rubber technology for near-dry Ultrasonic cou-pling. Using a single element 15mm immersion probe, the Single Element Wheel Probe is designed to operate between 1MHz and 10MHz and is available with a low pressure 38mm tyre (shown) and a higher pressure 25mm tyre. It is complete with an optical position encoder and can be connected to any conventional flaw detector such as the Sonatest MasterScan. > Our famous patented array wheel probe is the result of many years of research and careful design, in consultancy with our RapidScan2 customers in...

Open the catalog to page 2
Wheelprobe and Sensors - 3

Sliding Bubbler Probe > 50mm array The Sliding Bubbler Probe is designed to work with the RapidScan3D and the FaroArm scanner, and is used for rapid coverage of areas that are inaccessible to the Wheel Probe such as webs, T-sections and confined regions. Using a 50mm array with 64 elements it produces excellent data quality and coupling is helped by two spring loaded rollers which ensure that the sensor is properly positioned on the surface of the part. A water feed is used which supplies a bubbler to pro- duce a small pool of coupling water around the active area of the sensor. Miniature...

Open the catalog to page 3
Wheelprobe and Sensors - 4

Tel +44 (0) 1246 267550 Fax +44 (0) 1246 269381 E-mail sales@ndtsolutions.com Web www.ndtsolutions.comNDT Solutions Ltd Dunston Innovation Centre Dunston Road Chesterfield, UK S41 8NG > ԩ Copyright NDTS 2006. All rights reserved.Part No: 147352 size="-1">

Open the catalog to page 4

All Sonatest Ltd catalogs and technical brochures

  1. Sonacoat III

    2 Pages

  2. Prisma

    8 Pages

  3. Rapidscan 2

    6 Pages

Archived catalogs

  1. Dryscan 410D

    4 Pages

  2. Sonacoat P

    2 Pages