Text version of the page

Remote-controlled Solving Mover

The air lm Mover consists of a load carrying steel frame covered with oor plate. The air bearings are mounted in the corners under the Mover and the pressure in the air bearings is automatically regulated according to the weight of the load and the position of the centre of gravity. The drive units are centrally placed under the load. Using these built-in drive units the Mover can be driven forwards and backwards at an in nitely adjustable speed, providing good manoeuvrability. When equipped with a steerable drive unit, the Mover can also be driven sideways either to the right or left. These drive units are rotated using an air cylinder.When handling pallets, the Mover is equipped with ‘no load’ wheels to enable the unit to be driven under the pallet.The Mover’s control system is mounted in the control console from where the operator can control and supervise all functions.

TECHNICAL INFORMATION

Capacity

10 - 24 tonnes

Length

2 250 - 3 400 mm Width 1 400 - 1 600 mm Height 155 - 400 mm

Air consumption

3 400 - 4 700 Nl/min

SPECIFICATIONS BY TYPE

TypeCapacitytonnesLength L1mmLength L2mmWidth WmmHeight HmmAir consumptionNI/min SAPT10R-2X102 2501 9501 4001553 500SAPT10R-2XY103 4003 1001 4001953 500SAPT24R-2R*243 0002 6701 6004003 400 SAPT24R-2XY243 4003 070 1 6002404 700 * Electric drive units
Ab Solving Oy PO Box 98 FI-68601 Jakobstad FinlandTel. +358 6 781 7500 Fax +358 6 781 7510 info@solving. www.solving.