Text version of the page

Solving Beam Mover

Solving Beam Movers are usually used in pairs, each beam equipped with two air bearings in a single construction. Two or three beams are then placed under the load to be moved and connected to a control box. Compressed air is connected to the control box, and this en-ables the air bearings to create an almost friction-free lm of air on which the load can be oated. The movement takes place either manually or with the aid of drive units.

TECHNICAL INFORMATION

Capacity

7–44 tonnes Example of use with two beams

Length

1 000–2 600 mm

Width

300–920 mm

Height

55–80 mm

Weight

25–100 kg

Air supply

15–25 mm DN

Air consumption

1 200–4 000 NI/min

SPECIFICATIONS BY TYPE

TypeCapacity/pair kgAir bearing elementSize 1 LxWxH mmWeight kgAir supply mm DNAir comsumption 2 NI/min SP 77 000SE 12-1,81 000x300x5525151 200SP 1010 000SE 15-2,51 200x380x6030202 200SP 1414 000SE 21S-3,51 600x540x7060203 000SP 2424 000ME 27S-6,02 100x690x8080203 600SP 4444 000ME 36S-112 600x920x80100254 000 1 The length L can be speci ed as required
2 Approximate values (total for two beams)Other dimensions and modi cations, such as extra height or multiple bearings, are available upon request.
Ab Solving Oy PO Box 98 FI-68601 Jakobstad FinlandTel. +358 6 781 7500 Fax +358 6 781 7510 info@solving. www.solving.