Catalogs >
SOLO Swiss & BOREL Swiss >
Temperature controllers ECO 300

Temperature controllers ECO 300
2Pages

Catalog excerpts

St d d Furnaces & O Standard F Ovens since 1918 AXRON TEMPERATURE CONTROLLERS Definition: The controller is used to set the desired furnace (or oven) temperature. The furnace heats up to this temperature then heats intermittently to maintain it. With a programmable controller, the desired temperature can be associated with the time requested to reach it. Each of the temperature/time pairs is called a segment. A set of segments forms a program, and some regulators allow several programs to be memorised. There are principally 2 types of segment. Ramp: the furnace temperature rises or falls to the preset temperature as a function of the desired time, following a linear progression and heating intermittently. The other is the dwell type: the furnace maintains a steady temperature by heating intermittently. Example: Rise to 400°C in 3 h, maintain 400°C for 6 hours, rise to 900°C in 4 h, maintain 900°C for 2 hours, maintain 1100°C (the rise is not timeconstrained, it will be achieved as best) fall in 15 h, 1 programme, 6 segments Display: Dual display, measured temperature in red, target temperature in green Electricity: Screw terminal block 0.5 to 1.5 mm2 Memory: Memorisation of set temperatures and programmes when furnace is shut down Mounting: The regulator can be removed from its housing from the front without dismantlement or tools Documentation: Instructions in English Photos for illustration purposes only Type Function Number of programs Available size Single-loop Controller with Programmable Programmable Programmable Programmable controller ramp controller controller controller controller - TCP-IP interface option + PC communication software (PC Option): Control of the oven at distance. Simple temperatures recording (reference and measure) with a fixed time interval. The software enables the transfer of programmes from the PC to the controller and the controller to the PC, as the modification of the instructions and control parameters remotely. Specifications subject to chan

Open the catalog to page 1

St d d Furnaces & O Standard F Ovens Controller: The AXRON ECO 300Y-N controller is simple to use. Temperature rise/ fall by the action of incrementing/decrementing arrows. Once the temperature is entered, the furnace heats up to reach and maintain it. • Advanced PID 150/450 segments programmable controller: Programmable controller with 10/30 recordable programs of 15 steps. The programs can generate ramps and dwells. • Advanced PID • Number of programs: 10 or 30 • Number of segments per program: 15 • Ramp or dwell function for each segment • Delayed start 500 segments programmable...

Open the catalog to page 2

Temperature controllers ECO 300 2Pages

Catalog excerpts

All SOLO Swiss & BOREL Swiss catalogs and technical brochures

Temperature controllers ECO 300
2Pages