SmartScan User Manual - 145 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

  12. P. 30

  13. P. 40

  14. P. 50

  15. P. 60

  16. P. 70

  17. P. 80

  18. P. 90

  19. P. 100

Catalogue excerpts

SmartScan Users Manual ii > This manual is delivered subject to the following conditions and restrictions: This manual contains proprietary information belonging to Solid Applied Technologies Ltd. Such information is supplied solely for the purpose of assisting explicitly and properly authorized users of SmartScan. The text and graphics are for the purpose of illustration and reference only. The specifications on which they are based are subject to change without notice. No part of its contents may be used for any other purpose, disclosed to any person or firm or reproduced by any means, electronic...

 Open the catalogue to page 2

Please review the following points before installing and operating the SmartScan system. SmartScan must be installed, connected and operated according to the instructions in this Manual. If installed incorrectly or used for applications for which it is not intended, application-related dangers may arise. Only qualified personnel are authorized to install and operate SmartScan. When SmartScan is reopened, ensure that you replace the O-ring, in order that the unit will remain sealed (for IP67 units). The O-ring is suitable for one use only. Modifications and repairs to SmartScan are permissible...

 Open the catalogue to page 3

Introducing SmartScan C HAPTER 1 1 > Main (electronic) control unit: If required, this component can be optionally wall mounted, using a wall-mount plate, or panel mounted. To ensure proper operation, the unit must be installed up to 200 m (656 ft) from the sensor and 100m (328 ft) for EX sensors. Sensor and data cable: The sensor is supplied with the data cable attached. See description of available cable lengths in Page 16. SmartScan is a non-contact, ultrasonic, continuous-level measurement instrument that is able to provide accurate measurements for both liquids and solids, while automatically...

 Open the catalogue to page 10

SmartScan Users Manual 2 The SmartScan product line comprises two families, SmartScan 25 (25 KHz) and SmartScan 50 (50 KHz), each with its own models (as listed below). A variety of sensors are available for SmartScan 25, suitable for different ranges. SmartScan 25: SmartScan L for liquid (Standard Range/Long Range) SmartScan S for solid (Standard Range/Long Range) SmartScan O for open channel (Standard Range/Long Range) SmartScan R for Liquid short Range SmartScan 50: SmartScan L for liquid SmartScan S for solid SmartScan O for open channel SmartScan D for diameter >

 Open the catalogue to page 11

Introducing SmartScan C HAPTER 1 3 The following diagrams show the front and side views of SmartScan, and its dimensions in millimeters: > Figure 1: Front View of SmartScan Figure 2: Side View of SmartScan size="-1">

 Open the catalogue to page 12

SmartScan Users Manual 4 The following schematic diagrams show the wall-mount and panel-mount options, with the dimensions in millimeters: > Figure 3: Wall-mount Plate Figure 4: Back View of SmartScan with Wall-mount Plate size="-1">

 Open the catalogue to page 13

Introducing SmartScan C HAPTER 1 Figure 5: Panel Mount Figure 6: Top View of SmartScan with Panel-mount Installation >

 Open the catalogue to page 14

SmartScan Users Manual 6 > 25 kHz Standard Range 25 kHz Long Range Sensor > Figure 7: SmartScan Sensor Dimensions size="-1">

 Open the catalogue to page 15

Introducing SmartScan C HAPTER 1 7 50 kHz Sensor > Figure 7 (Cont.): SmartScan Sensor Dimensions size="-1">

 Open the catalogue to page 16

SmartScan Users Manual 8 > Short Range 25R 0.6 m to 10 m (2 ft to 32 ft) Standard Ran g e 25S 25L, 25O 0.6 m to 20 m (2 ft to 64 ft) 0.6 m to 25 m (2 ft to 82 ft) Long Range 25S, 25L, 25O 0.6 m to 30m (2 ft to 98 ft) 0.6 m to 40 m (2 ft to 131ft) Hazardous Installation version: Short Range* 25R 0.6 m to 10 m (2 ft to 32 ft) Standard Range 25S 25L, 25O 0.6 m to 15 m (2 ft to 49 ft) 0.6 m to 20 m (2 ft to 64 ft) Long Range 25S, 25L, 25O 0.6 m to 20 m (2 ft to 64 ft) 0.6 m to 25 m (2 ft to 82 ft) > SmartScan 25L, 25S, 25O, 25R 0.25% of the measuring range 0.30% of the measuring range Resolution 1...

 Open the catalogue to page 17

Introducing SmartScan C HAPTER 1 9 > Enclosure IP 65/67 (NEMA X4/X6), plastic ABS, wall mount/panel mount Pollution degree 2 (as per IEC61010) Insulation category II (as per IEC61010) Mechanical fitting Gland connection Pg9 Conduit connection 1/2" NPT Conduit connection M20 x 2.5 Temperature range DC model: -40 C to 60 C (-40 F to 140 F) AC model: -20 C to 60 C (-4 F to 140 F) Dimensions 272 mm x 200 mm x 85 mm (10.7" x 7.9" x 3.3") Weight 1.6 kg (3.5 lb.) > Wetted parts PolyProp (PP) (PVDF: optional), SS or coated aluminum (ECTFE / Halar) Signal power between unit and sensor Min. range: 4Vp-p...

 Open the catalogue to page 18

SmartScan Users Manual 10 Up to 25m (82ft) Up to 75m (246ft) Hazardous Installation version: Max. cable length between unit and barriers between sensor and barriers > Display Customized LCD Supply 18 to 30 VDC (0.25 A max), (external fuse: Slow Blow 1A T type***) or 100 җ 230 VAC, 50/60Hz, 70mA Max. Outputs 4-20 mA, 750 load @ 24 VDC Interface RS-232 or RS-485 Protocol Modbus RTU Relays 5 independent SPDT**** >

 Open the catalogue to page 19

Introducing SmartScan C HAPTER 1 11 > CE - EMC, FM Safety, FCC Transmitter: FM, (Classified): Non Incendive, Class I,II,III/ Division 2/ Groups ABCDFG/T4 Sensor: ATEX: II 1G, EEx ia IIC T4 ( > * FM, (Classified): Intrinsically safe Class I,II,III/Division 1/ Groups ABCDEFG/T4 Non Incendive, Class I,II,III/Division 2/ Groups ABCDFG/T4 > * Consult factory ** IS model tempВ range is 70 C *** Recommended type: 0034.3117 Schurter **** Up to 6 relays available in multi-sensor models size="-2">

 Open the catalogue to page 20

SmartScan Users Manual 12 > SmartScan 50L 0.4 m to 12 m (1.3 ft to 39.4 ft) SmartScan 50S 0.4 m to 8.5 m (1.3 ft to 28 ft) SmartScan 50D 0.5 m to 3 m (1.6 ft to 9.8 ft) SmartScan 50O 0.4 m to 12 m (1.3 ft to 39.4 ft) > SmartScan 50L 0.2% of the measuring range SmartScan 50S 0.25% of the measuring range SmartScan 50D 0.1% of the measuring range SmartScan 50O 0.2% of the measuring range > Enclosure IP 65/67 (NEMA X4/X6), plastic ABS, wall mount/panel mount Pollution degree 2 (as per IEC61010) Insulation category II (as per IEC61010) Mechanical fitting Gland connection Pg9 Conduit connection 1/2"...

 Open the catalogue to page 21

Introducing SmartScan C HAPTER 1 13 (10.7" x 7.9" x 3.3") Weight 1.6 kg (3.5 lb.) > Wetted parts PolyProp (PP) (PVDF: optional), glass reinforced epoxy Operating pressure Atmospheric Operating temperatureSignal power between unit and sensor -40 C to 100 C (-40 F to 212 F) Min. range: 4Vp-p Max. range: 400Vp-p Mounting 1" BSP, 1" NPT Transducer 50 kHz Maximum sensor cable to unit distance 200 m (656 ft) > Display Customized LCD Supply 18 to 30 VDC (0.25 A max) (external fuse: Slow Blow 1A T type*) or 100 230 VAC, 50/60Hz, 70mA Max. Outputs 4-20 mA, 750 load @ 24 VDC Interface RS-232 or RS-485 Protocol...

 Open the catalogue to page 22

All Solid Applied Technologies Ltd. catalogues and technical brochures

  1. SMARTSCAN 50

    2 Pages

    En
  2. GAUGER 485

    2 Pages

    En
  3. GAUGER GSM

    2 Pages

    En
  4. SmartScan

    2 Pages

    En
  5. MicroScan™

    2 Pages

    En