MonoScan User Manual - Solid Applied Technologies Ltd. - #5

/ 88


catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
P. 37
P. 38
P. 39
P. 40
P. 41
P. 42
P. 43
P. 44
P. 45
P. 46
P. 47
P. 48
P. 49
P. 50


See other catalogues for Solid Applied Technologies Ltd.

Text version of the page
Table of Contents\
Selecting Low/High Dynamic Speed ..........................................................37
Defining Working Area...............................................................................39
Selecting Distance or Level Display............................................................41
Entering factor for Gas Compensation........................................................43
Restoring the Default Settings.....................................................................45
Shifting the Blocking Distance.....................................................................46
Verifying the Version Number.....................................................................47
Defining 22mA Signal Error Messages.........................................................48
Chapter 4...................................................................................50
MonoScan Open Channels.........................................................50
Selecting the Flow Measurement Settings...................................................50
Open Channels Flow Measurements...........................................................52
Flume/Weir Types..............................................................................53
Flumes/Weirs - European Standard....................................................54
Rectangular Suppressed Sharp-Crested Weir (Type 1).......................54
Rectangular Contracted Sharp-Crested Weir (Type 2).......................55
Trapezoidal (Cipolletti) Sharp-Crested Weir (Type 3)........................56
V-Notch (Triangular) Sharp-Crested Weir (Type 4)............................57
Khafagi-Venturi Flume (Type 5)..........................................................58
Parshall Flume (Type 6)......................................................................59
Palmer Bowlus Flume Trapezoidal Throat Cross-Selection (Type 7) .60
H Flume (Type 8)................................................................................61
Neyrpic Venturi Flume/Long-Base Weir (Type 9)...............................62
Flumes/Weirs — American Standard..................................................64
Rectangular Suppressed Sharp-Crested Weir (Type 1) ....................... 64

pageCatalog pdf di En 2012-05-22-31