PAR and lux light sensors - Solems - #1

/ 1


catalogue search
PAR and lux light sensors - Solems
P. 01
Page:
PAR and lux light sensors - Solems


See other catalogues for Solems
You may also be interested in

Sensor, Photovoltaic module, Generator, Solar cell, Light sensor


Text version of the page
www.solems.com SOLEMS S.A. 3 rue Léon Blum F- 91120 PALAISEAU – France - Tél : 33 (0) 1 69 19 43 40 – Fax 33 (0) 1 60 13 37 43 - info@solems.com FT- PAR_SSOLLEEMSS en/ 200-8 1/ p1 L’énergie lumière SOLEMS PAR sensors are simple and solid quantum sensors measuring a visible radiation very similar to PAR and lux spectral range. They can be used indoors or outdoors, in any climatic conditions. Calibration given below corresponds to natural sunlight. Réponse spectrale typique des détecteurs PAR 0 0,2 0,4 0,6 0,8 400 450 500 550 600 650 700 750 longueur d'onde (nm) Spectral response : 400 - 750 nm Active material : amorphous silicon Illumination range : 1 - 2500 .moles PAR/m².s or 10 - 150000 lux Type of output : voltage Temperature coefficient in % / °C : + 0.2 % from - 5 to + 40 °C Cosine response : corrected up to 80° Weather protection : PMMA housing and polyurethane resin Connections : Shielded cable 2 x 0.22mm² 5 m-long (1) Permanent temperature : - 30 °C / + 40 °C Peak temperatures : - 40 °C / + 60 °C Permanent humidity : 85 % R.H. Peak humidity : 100 % R.H. UV stability : Excellent (PMMA filters UV) Occasional immersion : possible only during a few hours with amorphous silicon cells PAR & lux sensors PAR/CBE 80 Ponctual PAR sensor in mV No external power needed (photovoltaic mode) Ref. DPAR/CBE2B# Active area : 32mm² Typical output : 80 mV @ 1000 3moles PAR/m².s 120 mV @ 100 000 lux Dimensions (excluding the cable) : Ô 25 mm H 18.5 mm PAR/CBE 4-20 Ponctual PAR sensor 4-20mA Current loop with a 15V power supply and a charge of 180ohms Ref. DPAR/4201B# Active area : 32mm² Typical output : 20 mA @ 1200 3moles PAR/m².s (can be adjusted on request) Dimensions (excluding the cable) : Ô 25 mm H 18.5 mm PAR/LE Line 30cm PAR sensor in mV No external power needed (photovoltaic mode) Ref. DPAR/LEC1C# Active area : 286 x 3mm (complete detective surface) Typical output : 30 mV @ 1000 3moles de PAR/m².s 45 mV @ 100 000 lux Dimensions (excluding the cable) : 295 x 20 x 15mm (1) Other cable lengths available : 10, 15, 20, 30, and 50 m. Product ref. according to cable length. Example : DPAR/CBE2BR = PAR/CBE 80 with a 20m- cable (B=5m P=10m Q=15m R=20m S=30m T=50m). PAR sensors typical spectral response Wavelength (nm)

pageCatalog pdf di En 2012-05-22-31