20 Specification 21 Spring push 8mm

6mm Analogue Analogue Analogue Analogue Analogue Analogue Analogue Product type LVDTA6G/1/S- H/BA6G/1/SH- DigitalD6P/2/S- LVDTAX/0.25/S- H/B DigitalDP/0.5/S- LVDTAX/0.5/S- H/B DigitalDP/1/S- LVDTAX/1/SAT/1/S H/BAX/1/SHAT/1/SH DigitalDP/2/SDT/2/S LVDTAX5/1/S- H/BAX5/1/SH- Digital LVDTAX/1.5/SAT/1.5/S H/BAX/1.5/SHAT/1.5/SH Digital-- LVDTAX/2.5/SAT/2.5/S H/B DigitalDP/5/SDT/5/S LVDTAX/5/SAT/5/S H/BAX/5/SHAT/5/SH DigitalDP/10/SDT/10/S LVDTAX/10/SAT/10/S H/BAX/10/SHAT/10/SH DigitalDP/20/SDT/20/S Axial cable outlet: Standard SpringFeather Touch AX/0.25/SH AX/0.5/SH DP10/2/S AX/2.5/SHAT/2.5/SH - - - VacuumRadial cable outlet: Standard Spring -- -- -- -- - - -- -- - - -- AX/1/VAXR/1/S AX/1/VHAXR/1/SH -- -- -- -- AX/1.5V- AX/1.5VH- -- AX/2.5/V- ±2.5 AX/2.5/VH -- AX/5/V- ±5 AX/5/VH- -- AX/10/V- ±10 AX/10/VH- -- 0.5, 2.5µm - 0.5, 5µm 0.7, 10µmAnalogue: Dependent on electronicsDigital: User selectable to <0.1µm Feather Touch - - - - - - - - - ATR/1/S ATR/1/SH DTR/2/S - - - ATR/1.5/S ATR/1.5/SH - ATR/2.5/S ATR/2.5/SH DTR/5/S ATR/5/S ATR/5/SH DTR/10/S ATR/10/S ATR/10/SH DTR/20/S Measurement Measurement Range (mm) ±1 2 ±0.25 0.5 ±0.5 1 ±1 2 ±1 2 ±1.5 - 5 10 20 Accuracy
1 (% of reading or µm) 0.5, 1µm 0.1 0.5, 0.5µm 0.1 0.5, 1µm0.51 0.1 0.5, 1µm 0.1 0.5, 1µm 0.1 0.5, 1.5µm0.150.15 0.851.50.7 @ mid position 0.3 @ mid position0.018h61.51.5 - 0.2 0.2 0.2 Resolution Repeatability (µm) 0.15 0.1 0.15 0.15 0.15 - 0.15 0.15 0.15 Pre-travel (mm) 0.15 0.03 0.15 0.15 0.15 - 0.15 0.15 0.15 Post-travel (mm) 0.35 0.05 0.35 0.35 0.85 - 0.85 0.85 0.85 Pre-travel Adjustment range (mm) None None None None None - None None None Tip Force:Standard/Vacuum ±20% (N) - Tip Force:Feather Touch ±20% (N) - Temperature Coefficient %FS/C 0.02 0.03 0.03 0.01 0.01 - 0.01 0.01 0.01 Mechanical Body Diameter (mm) 6h6 8h6 8h6 8h6 8h6 - 8h6 8h6 8h6 Electrical Interface (Plugged)
2 Sensitivity (mV/V/mm ±5%) 200 73.5 - 200 73.5 - 200 73.5 - 200 73.5 - 200 73.5 - 133 49 - 80 29.4 - 40 14.7 - 20 7.35 - Energising Current (mA/V±5%) 3 1.2 - 2.2 1.2 - 2.2 1.2 - 1.8 1 - 1.8 1 - 2 1 - 2 1 - 2 1.2 - 1 1.2 - Electrical Interface (Unplugged)
2 Sensitivity (mV/V/mm ±5%) AnalogueAnalogue 269 88 - 262 82 - 262 82 - 210 83 - 210 83 - 150 82 - 150 82 - 105 51 - 33 33 -
3 Industrial viton is a trademark of DuPont Dow Elastomers. Materials Environmental (Probe Head Only) Digital Probe Interface Electronics
5 1 Probe Accuracy 4 Cables The accuracy of the LVDT and Half Industrial bridge probes is quoted as % of reading orµm, which ever is greater. The accuracy of the Digital Probe range is quoted as [(resolution) + (accuracy%) x D] where D is the distance from the setting master. All probes are supplied with 2 m of PUR cable as standard. Other lengths and options such as nylon braided, metal braided and armoured are available onrequest. Case: Stainless Steel Storage Temp (C): -40 to +100 Reading Rate:Up to 3906 readings/second Bandwidth:Up to 460Hz dependent on noise
5 Digital Probe Termination Tip:Nylon or Tungsten Carbide* Operating Temp
6 with gaiter (C): +5 to +80
Digital Probes are terminated with Solartron’s Probe Interface Electronics (PIE) module. Please refer to the Orbit Network for details on this module andmethods of integration for Digital Probes. Gaiter
3 :Viton Operating Temp
6 without gaiter (C): -10 to +80 performance requiredOutput:Serial communication-RS485 signal
(Please refer to the Glossary for definitions) 6 Below 0C environment must be dry Accuracy, sensitivity and energising current are valid for the following calibrationconditions: LVDT probes calibrated at 3 V, 5 kHz frequency into a 10 k Cable
4 : PUR IP rating:IP65
2 LVDT and Half Bridge Probe Performance Ω load or100 k

*

Other options available level (Solartron Orbit Protocol)Power:5 ±0.25 VDC @ 0.06A
IP rating not applicable to Feather Touch Ω for the unplugged versions. Half Bridge probes calibrated at 3 V, 10kHz frequency into a 2 k Ω load or 1 k Ω for the unplugged versions. The probeswill operate with energising voltages in the range 1 V to 10 V and withfrequencies in the range 2 kHz to 20 kHz but the performance is not specified. Operating Pressure Range (includes power for probe) Vacuum operation:0 to 0.27 Bar absolute Storage Temp (C):-20 to +70 Operating Temp (C):0 to +60 IP Rating:IP43 0.7 @ mid position0.3 @ mid position0.3 @ mid position0.3 @ mid position0.3 @ mid position0.7 @ mid position0.7 @ mid position0.7 @ mid position0.3 @ mid position0.7 @ mid position0.3 @ mid position0.7 @ mid position0.3 @ mid position0.7 @ mid position0.3 @ mid position0.7 @ mid position