C·CURE NetVue Data Sheet - Software House - #2

Processor

Model Number 1 through 10 .... 1.5 GHz Intel Pentium III or higher Model Number 20 through 40 ... 1.8 GHz Intel Pentium III or higher

Model 8000 and 8000 Plus.....2.4 GHz Intel Pentium IV or higher

Free Hard Disk Space..........3.0 GB

Memory

Model Number 1 through 40____1 GB RAM

Model 8000 and 8000 Plus.....2 GB RAM

Network Card.................10/100Base-T

CD-ROM Drive................10X

Monitor/Video Adapter Board.....17" SVGA (1024 x 768), 64 MB RAM

Operating System..............Windows® 2003 Server (Service

Pack 2), Windows XP Professional

(Service Pack 3)

Mouse.......................PS/2 bus type, USB

Ports........................Two serial, one parallel, USB

(with C»CURE 800/8000 v8.x a

USB port is required)

Backup......................Tape orCDRW

Modem......................56.7 Kbps

Sentinel......................Supplied by Software House

Digiboard.....................8 port (Models 20/30/40)

Processor....................2 GHz Intel Pentium or higher

Free Hard Disk Space...........2.0 GB

Memory......................1 GB RAM

Network Card.................10Base-T

CD-ROM Drive................10X

Monitor/Video Adapter Board......17" SVGA (1024 x 768), 64 MB RAM

Operating Systems.............Windows 2003 (Service Pack 2),

Windows XP Professional (Service

Pack 3)

Mouse.......................PS/2 bus type, USB

Intellex DVMS.................v3.2

Intellex LT and Ultra.............v4.0

VideoEdge NVR...............2.0.4.042

Verint (Loronix)................v4.0

NICE Systems.................v6.x

Integral Technologies

(DS XPress and DVXi)...........v4.1.x (requires C»CURE 800/8000

v7.0 or higher)

Pelco DX8100.................v1.1x or higher

Intellex.......................v4.2

VideoEdge....................v2.09

NICE Systems.................v10.0

Verint (Loronix)................v4.32

Verint (Nextiva)................v5.1 SP2

Integral Technologies

(DX Xpress and DVXi)...........v1.3.0.162

Pelco DX8100.................v3.2.4

Note: It is recommended that customers use the most current firmware release for each controller.

OCURE 800/8000's Monitoring Station can display maps (on event activation) with NetVue icons (camera, dome, and more) providing you with the ability to view live video. By double-clicking the camera/ dome icon, a NetVue window appears showing

the live video feed. In the case of a dome, an additional PTZ GUI appears to allow you to control domes that are interfaced to video switchers.

Unique identifiers associated with NetVue video clips are captured in the OCURE 800/8000 journal. You can click on the NetVue icon from the journal replay to observe the associated video segment.

The video tour feature allows you to view live video with the help of NetVue Player from a pre-configured collection of cameras. NetVue Player displays streams of live video in an adjustable NetVue window. Starting with the first camera, video displays for a fixed amount of time then the tour automatically advances to the next camera. This process continues until the last camera in the tour is reached or indefinitely if looping is enabled. You can pause or alter the direction of the tour while still retaining full access to recording, text overlay, PTZ, and bi-directional functionality.

The video view feature allows you to pre-select a group of cameras, position them in a grid (1x1, 2x2, 3x3, or 4x4), indicate the NetVue Player size, and determine its initial text overlay status. You can then save this collection as a video view for future viewing.

NetVue users interfacing with NICE systems can PTZ the dome to move to a preset position based upon the operator's input. NetVue users interfacing with Intellex can establish presets and patterns via an operator, action, or tour stop configuration. The dome can move to a preset position or follow a pattern based upon an event, alarm, input, or video tour.

Gain administrative control over alarm activity by assigning privileges to operators who have access to view NetVue alarms or alarm groups. With C»CURE 800/8000, you can disarm a NetVue alarm or alarm group once verified. This eliminates the large number of alarms that were once displayed on the general activity monitor.

Product offerings and specifications are subject to change without notice. Actual products may vary from photos. Not all products Include all features. Availability varies by region; contact your sales

'epresentatlve.Certain product names mentioned herein may be trade names and/or registered trademarks of other companies

O2008 Tyco International Ltd. and Its respective companies. All rights reserved. SH0123-DS-200904-R04-LT-EN