THERMOSET MIVI 8003

On-line viscosity measurement of any fluid Advantages

- Short response time:

at a required constant

2 to 5 min - No extra installation

temperature

- Insignificant maintenance: ½ day / year - Small size

Principle

- Reliable and accurate The fluid is permanently drawn from the process,brought at the required temperature, its viscosity measured, then re-injected in the main line. - Usual power: mains and pressurized air - Optional density measurement

DESCRIPTION is composed of 2 main parts : THERMOSET MIVI

Process at different temperatures 120°C ? 150°C ? 200°C ? 1) One compact cell , stainless steel made, where the product flows,reaches the required temperature, then viscosity measured: o Process connection by means of standard flanges DN 10 PN 25 o Flowing volume: 0.150 l – Flow rate: 20 l / h o Link to the hereafter electronic cabinet by means of one specialcable (viscosity and temperature signals) and by usual cables(monitoring circuits). Any length available. o Every electrical part Exproof approved o Outside installation o Others measurements in option (density, refractive index…) 2)
8003 One electronic professional cabinet 8003 , to be installed in safe area, or controlroom, monitoring the cell circuits, controlling the fluid temperature,processing viscosity and temperature information, providing their digitaldisplay and their corresponding analog and digital outputs. Reprogrammable with memory card or configuration software. Viscosity at one or two referencetemperatures

TECHNICAL CHARACTERISTICS

1) Exproof classification for the cell parts (ATEX agreement) 2) Viscosity range (at reference temperature): 1 – 100 mPa.s ; 10 – 1000 mPa.s ; 100 – 10 000 mPa.s 3) Repeatability: ±0. 5% full range 4) Response time: 2 to 5 min 5) Delivered information: o Digital display for viscosity and temperature o Viscosity and temperature outputs: 0/4–20 mA DC on 500 ohms galvanicallyisolated o RS 485 link o Viscosity and temperature alarms o Other possibilities on request. Consult us. 6) Required power: 230 Vac, single phase, 50-60 Hz, 1 kVA + pressurized air, 7 bars, 0.5 m
Quality System 3 /h 7) Operating conditions o Maximal temperature at the cell: 200 °C o Reference temperature: according to the requirement o Maximal inlet pressure: 16 bars o Maximal outlet pressure: 40 to 120 bars according to product viscosity
Ref. : 138/2