Group: SMC
Catalog excerpts
Compact Cylinder Remodeled with a new body to get more flexibility! Can mount small auto switches on 4 surfaces. Auto switches can be mounted on any of the 4 surfaces, depending on the installation conditions. (ø12 to ø25: 2 surfaces) Improved flexibility of system design. Auto switch mounting rail removed NEW A round slot for mounting small auto switches Available up to ø200 is provided on 4 surfaces. ø32 to ø50 : Only one surface Existing model NEW ø32 to ø200 Auto switch rail Rail mounting type auto switch Small auto switch ø25: Mountable on 2 surfaces 2 switches can be mounted on the same surface. (ø12: One slot for each surface) No protrusion of auto switch Existing model ˾ Prevention of damage to auto switch ˾ Sleeves cannot get caught in the auto switch and its mounting rail. Improved ease of work and safety ˾ Reduction in labour for design There is no need to check for interference with a machine, because the outer dimensions of the cylinder do not change when the auto switch is mounted. NEW Exclusive bodies (-XB10) for ø32 to ø100 intermediate strokes (50 mm or more) now kept in inventory*, enabling shorter delivery times. * Formerly produced upon receipt of order Currently stocked intermediate stroke
Open the catalog to page 1Compact Cylinder (Compared with SMC CQ2 series) Existing model Lighter weight Weight (Stroke 50 mm, built-in magnet, female thread and with (g) rubber bumper) The body strength (kinetic energy, allowable load, withstand pressure, etc.) is the same as the existing product. Contribution to environment and ecology Bore size – Stroke NEW ø40-50 st 456(483) 483(527) ( ): With male thread Reduction of CO2 discharge by 1300 t by less use of aluminum 2-colour indication solid state auto switch Appropriate setting of the mounting position can be performed without mistakes. Operating range Small auto...
Open the catalog to page 2˾ Reduction in number of components ˾ No loss of components Reduction in labour for work Auto switch 1 Insert the auto switch. ˾ Takes more labour and time Existing model because there are many components. ˾ It is likely to lose components Auto switch The nuts and screws may fall out when installed vertically. Auto switch ˾ The auto switch can be replaced with the foot brackets mounted. Reduction in labour for design Auto switch Auto switch Existing model The bracket does not interfere with the slot. Port side Auto switch side The bracket interferes with the slot. Auto switch side Port side...
Open the catalog to page 3Compact Cylinder Series CQ2 With a short overall length, the space-saving cylinder helps to make various jigs and equipment more compact. Series Variations Double acting Double rod CQ2W Single acting Large Bore Size Spring return/ Spring extend Double acting CQ2KW Axial Piping (Centralised piping type) Double acting Single acting Anti-lateral Load Double acting Double acting Spring return/ Spring extend Double acting Long Stroke Axial Piping Anti-lateral Load Water Resistant With Auto Switch Large Bore Size NEW Smooth Cylinder (Low friction) Refer to Best Pneumatics No. 3. Low-speed...
Open the catalog to page 5Combinations of Standard Products and Made Special product (For details, please contact SMC.) Made to Order: For details, refer to pages 177 to 207. Double acting Single acting Spring return Spring extend (Large Bore Size) Double acting Note 1) 012 with auto switch: With rubber bumper (Standard) Note 2) With rubber bumper (Standard) Note 3) 012 to 016: (O), for 020 to 0100 only (up to 050 for single acting type)
Open the catalog to page 6Note 7) 020 to 025: (O), for 032 to 0100 only Note 10) With boss on rod end (Standard) Note 8) Rod end lock: (-), for head end lock only Note 11) 0l8Oto02OO: (O), for 0125 to a160 only Note 9) Head end lock: (-), for rod end lock only Note 12) The body shape is the same as the existing product
Open the catalog to page 7Compact Cylinder: Standard Double Acting, Single Rod Without auto switch ø32 to ø100 With auto switch Auto switch With auto switch (Built-in magnet) Through-hole (Standard) Both ends tapped Foot applicable auto switches. Rod flange Head flange Double clevis Auto switch mounting groove Z ∗ Mounting brackets are shipped together, (but not assembled). ∗ Cylinder mounting bolts are not included. Order them Pneumatic Air-hydro Note 1) Body option Bore size Port thread type Refer to the next page for details. Note 1) Bore sizes available for air-hydro type are ø20 to ø100. Number of auto switches...
Open the catalog to page 8Compact Cylinder: Standard Double Acting, Single Rod Specifications Pneumatic type Made to Order (For details, refer to pages 177 to 207.) Note) Stroke length tolerance does not include the amount of bumper change. Air-hydro type Bore size (mm) Action Fluid Proof pressure Maximum operating pressure Minimum operating pressure Ambient and fluid temperature Piston speed Cushion Stroke length tolerance Double acting, Single rod Turbine oil Note) 1.5 MPa 1.0 MPa 0.18 MPa 0.1 MPa 5 to 60C 5 to 50 mm/s None Note) Refer to “Handling Precautions for SMC Products” (M-E03-3) for Actuator Precautions...
Open the catalog to page 9Series CQ2 Manufacture of Intermediate Strokes (Except air-hydro type) 1. Spacer-installed type 1: Standard model number Intermediate stroke with : Available in 1 mm intervals A spacer is installed on tubes with a stroke longer than the specified stroke ( Bore size (mm) : Standard stroke Ordering example (when ordering ø32-57 mm stroke (with through-hole (standard), without switch) Type Part no. 1. Spacer-installed type 1 Standard model number CQ2B32-57DZ (uses 75 mm stroke tube) Order no. • CQ2B32-75DZ with 18 mm width spacer inside • The B dimension is 108 mm. 2. Spacer-installed type 2:...
Open the catalog to page 10Compact Cylinder: Standard Double Acting, Single Rod Allowable Kinetic Energy Allowable Lateral Load at Rod End Load Weight and Piston Speed Without Auto Switch m1: Weight of cylinder movable parts kg m2: Load weight kg V: Piston speed m/s Weight of Cylinder Movable Parts/Without Built-in Magnet (g) Bore size (mm) Weight of Cylinder Movable Parts/With Built-in Magnet (g) Bore size (mm) Cylinder stroke (mm) If an allowable lateral load at rod end is exceeding the value in the graph, we recommend anti-lateral load type cylinder be used. (Mounting orientation: Horizontal) With Auto Switch...
Open the catalog to page 11All SMC catalogs and technical brochures
-
Serie HRR
64 Pages
-
Série VP/VG
33 Pages
-
Série XL
27 Pages
-
Série ACG/ARG/AWG
45 Pages
-
Série JXC5H/6H
36 Pages
-
LEJS100-X400 series
15 Pages
-
JMB series
13 Pages
-
JCM series
21 Pages
-
PF3A7*H
40 Pages
-
PF3W
34 Pages
-
Compact Guide Cylinder with Lock
36 Pages
-
Water Treatment
16 Pages
-
Food & Packaging Industry
4 Pages
-
Digital Gap Checker
26 Pages
-
Vacuum Pad
16 Pages
-
One-touch Fittings
224 Pages
-
Soft Start-up Valve
16 Pages
-
Electric Actuator
272 Pages
-
Rotary Actuator
40 Pages
-
Compact Guide Cylinder
18 Pages
-
Compact Slide
24 Pages
-
Air Cylinder
124 Pages
-
LEFB, LEFG-BS series
180 Pages
-
JMGP series
16 Pages
-
ISO Cylinder
32 Pages
-
IZD10
20 Pages
-
IZH10
8 Pages
-
Fan Type Lonizer
28 Pages
-
Check Valves
4 Pages
-
Compact Cylinder/Clean series
16 Pages
-
3 port solenoid Valve
74 Pages
-
Vacuum Ejector Series ZM
20 Pages
-
Series ZL
20 Pages
-
Series CM2
92 Pages
-
Series IDGA/IDG
56 Pages
-
Platform Cylinder Series CXT
14 Pages
-
IDH-A
12 Pages
-
CP96-C96-B
74 Pages
-
CVQ
24 Pages
-
HY
52 Pages
-
VNA
10 Pages
-
Series MXY
28 Pages
-
Series MXP
39 Pages
-
Air Slide Table
132 Pages
-
Compact Cylinder Series CQ2
138 Pages
-
S0700
112 Pages
-
SYJ
96 Pages
-
SY - NEW
164 Pages
-
VF
60 Pages
-
C(D)55 series
24 Pages
-
MGP series
36 Pages
-
11-LEFS series
19 Pages
-
LECS series
16 Pages
-
LECPA series
4 Pages
-
KQ series
80 Pages
-
IDF series
16 Pages
-
ZP series
69 Pages
-
MHF series
32 Pages
-
MHZ series
68 Pages
-
CRB series
44 Pages
-
MGJ series
7 Pages
-
AC series
98 Pages
-
VH series
14 Pages
-
LVA series
43 Pages
-
VDW series
28 Pages
-
LVM series
28 Pages
-
VX2 series
32 Pages
-
MXH series
32 Pages
-
MXF series
12 Pages
-
CXW series
48 Pages
-
CXS series
76 Pages
-
CQS series
40 Pages
-
CQM series
28 Pages
-
CLQ series
36 Pages