This cable connects the magnet to the Magsafe Control Unit. It has a 4 waycircular, bayonet locking connector at one end for connection to the magnet and open wires at the other for connection via a gland into the control unit. The controller is designed to complement the Magsafesystem by offering a local access controller with ‘traffic light’ entry condition indication. Connection is made via a standard 8 way connection provided on the Magsafecontrol units. Mounting is provided via M6 bolts in theend brackets top and bottom.The controller has a selector switch for Enter andmachine Run. Above the selector switch is the ‘traffic light’ system that provides the operator with the entry status indication. The red LED indicates that the magnets are closed / door locked and the machine is running. To open the door / release the magnets the selector switch is turned to the Enter position. The amber LED will come on during the machine stopping time / run down timer setting. When this is completed the green LED will come on to indicatethat the magnets have been released / the door is unlocked and the operator can enter. Cable X Cable Y

MAGSAFE

Local Access Controller Control Units The control units come in 2 options, offering thefacility for up to 4 monitored magnets from a single controller or up to 8 monitored magnets (16 un-monitored magnets) from a single controller. The control unit contains all the control electronics for the Magsafe system.Both boxes come with a standard 8 way connection for the Local AccessController, Run down timers for gate release, E-Stop inputs, External Device Monitoring (EDM) and LED output display with output signals for driving a PLC input. The box can be used in conjunction with the standard Smartscan Local Access Controller or the user can configure their own access control interface. The control units come in IP40 boxes with glanded industrial connectors for the magnet cable connections, power supply input and the interface cable to the machine control panel. CD227/080906HANDBOOK 7