INSTALLATION SHEET 49 Typical Mounting Arrangement for a Smartscan 1000 PlusThe 1000 Plus Series system does not use cable connectors.Both the transmitter and receiverunits come complete with 5m cables attached.Transmitter= 2 way cable, Receiver= 4 way cable.The 1000 Plus Series has a unique mounting arrangement. Threaded slots running from top to bottom of the transmitter and receiver columns enable M6 screws to be affixed at any position along the length of the slot.The M6 threaded slots run the entire length of the aluminium extrusion, between the two end caps. There is a slot at each side of the extrusion and two slots at the rear as shown in Fig. C.
Note: As an additional option a Mounting Bracket Kit (012-130) is available. 1 000 PL US S ERIE S