| General description The around the pump inductor is a foam concentrate proportioning unit designed for connection in a by-pass between the pressure and suction side of the fire water pump. This system diverts a small part of the feed water flow through the PI, with a negligible effect on the fire water line pressure. Commonly used in marine applications, around the pump inductors are also used on specialised foam trucks or fixed systems where a dedicated water pump is available. Product features • Manufactured using corrosion resistant materials • Factory calibrated flow/pressure settings • Can be set to selected flows anywhere within the PI range • Negligible effect on main water line pressure Cost effective, value added solution High quality, high reliability • Can be installed horizontally or vertically • Integrated suction check valve and regulating valve • PI series ranges from 100 to 25000 l/min system capacity and 1 to 770 l/min foam liquid suction capacity Connections • Water / foam inlet: flanged to fit DIN PN16 or ANSI 150lbs or screw threaded BSP Order information - please specify: 1. Water flow and induction rate 2. Flange type: DIN or ANSI 3. Size, selected from specification table |