Table .

1

Product information

2

Recommendations

3

Product data Page ................4Page ..............16 Rod ends requiring maintenance Relubrication facilities Fatigue strength All SKF rod ends requiring mainten- ance, with the exception of steel-on- steel rod ends of series SA .. E and SI .. E and the steel-on-bronze rod ends of size 5 are provided with a grease nipple or hole in the rod end housing. The type and design of the relubrication facilities in the rod end housing are shown in

Table 6

In all applications where a rod end is subjected to loads which vary in magni- tude or are alternating, or where thefailure of a rod end would be danger- ous, it is advisable to check that the selected rod end has a suitable fatigue strength.

SeriesPermissible operatingReduced loadtemperature range
1) carrying capacity fromincl.from –°C°C Steel-on-steelSA .. E(S) –50+300+100 SA(A) .. ES-2RS –30+130+100 SI .. E(S) –50+300+100 SI(A) .. ES-2RS –30+130+100 SIQG .. ES –50+300+100 SIJ .. ES –50+300+100 SIR .. ES –50+300+100 SC .. ES –50+300+100 SCF .. ES –50+300+100 –30+180+100 SIKAC .. M(VZ019) –30+180+100 Steel-on-bronze SAKAC .. M
7 1) NB. The permissible operating temperature range of the grease used should not be exceeded Permissible operating temperature range Relubrication facilities Table 7 SeriesSizeGrease nippleDesign

3.5

to DIN/ISOSA .. ES 15 .. 20Lubrication hole SI .. ES 15 .. 202,5 mm diameter SIJ .. ES 16 .. 20 SA(A) .. ES-2RS 25 ..80Lubrication nipple to SI(A) .. ES-2RS 25 ..80DIN 71412:1987, Form A SIJ .. ES 25 .. 100ISO 3799:1976 SIR .. ES 25 .. 120 SIQG .. ES 12 .. 200 SC .. ES 25 .. 80 SCF .. ES 20 .. 80 SAKAC .. M 6 .. 30Lubrication nipple to SIKAC .. M 6 .. 30DIN 3405:1986Form D

99