1

Product information

2

Recommendations

3

Product data Page ................4 Abutment and fillet dimensions Page ..............57
Fig 10 Fig 11 Abutment and fillet dimensions The abutment and fillet dimensions should be such that • a sufficiently large support surface isavailable for the bearing ring,• moving parts of the bearing arrange-ment cannot foul stationary compo- nents, and• the fillet radius should be smallerthan the chamfer of the bearing.Appropriate abutment dimensions(

2

âž” fig ) or anundercut ( âž” fig ). âž” fig ) are given for each bearingin the product tables. The transition from the bearing seating to the shaft or housing shoulder may be designed either as a fillet (
12 Locating a bearing using snap rings inthe housing and adjacent componentson the shaft Locating a bearing using adjacent com-ponents in the housing and a retainerring on the shaft 13 14 Recommended abutment and filletdimensions Fillet dimensions for shaft and housingshoulders Undercut dimensions for shaft andhousing shoulders Fig 12 Fig 13 Fig 14 brrh aas aba r bmax r 2min r s c r 2min D drr a r amax r c r h 1min a r s r r s 1min b a 41