Anti-fretting agent LGAF 3E

Anti-fretting agent LGAF 3E

Anti-fretting agent LGAF 3E

Product catalog summary
Introduction
SKF LGAF 3E is a specialized paste designed to prevent fretting corrosion, which is caused by slight oscillations or vibrations that can complicate the dismounting of components. It is particularly suitable for use on bearings and metal surfaces in loose fit arrangements, such as those found in vibrating screens and vehicle wheel bearings.
Key Features
  • Reduces fretting corrosion, facilitating easier dismounting of bearings.
  • Assists in the removal of various industrial components, including nuts, bolts, flanges, and more.
Technical Specifications
  • Designation: LGAF 3E
  • Specific Gravity: 1.19
  • Colour: White–beige
  • Base Oil Type: Mineral and synthetic
  • Thickener: Lithium soap
  • Operating Temperature Range: –25 to +250 °C (–13 to +482 °F)
  • Base Oil Viscosity at 40 °C: 195 mm2/s
Understanding Fretting Corrosion
Fretting corrosion is a type of surface damage that occurs in the contact area of two metals due to slight oscillations or vibrations. It is a common risk for bearings, particularly in loose fit arrangements, and can lead to uneven bearing seats and improper seating if not addressed.
Product Availability
  • 35 g tube: LGAF 3E/0.035
  • 0.5 kg can: LGAF 3E/0.5
  • 30 kg drum: LGAF 3E/30
Legal and Trademark Information
SKF is a registered trademark of the SKF Group. The content of this publication is copyrighted and cannot be reproduced without permission. The information is provided with care, but no liability is accepted for any loss or damage arising from its use.
See more

Catalog excerpts

Anti-fretting agent LGAF 3E-1

Anti-fretting Agent SKF LGAF 3E is a greasy, smooth paste to prevent fretting corrosion caused by very slight oscillations or by vibrations, that can make dismounting much more difficult. • Suitable for bearings and metal surfaces in loose fit arrangements, such as vibrating screens, truck and car wheel bearings • Reduces fretting corrosion thereby enabling easier dismounting of bearings • Assists with easier removal of general industrial components in a wide range of applications such as nuts, bolts, flanges, studs, bearings, guide pins, couplings, jack screws, lathe centres, push rods, and spline shafts Technical data Designation Specific gravity Lithium soap Operating temperature range What is fretting corrosion? Fretting corrosion is a progressive surface damage that occurs in the contact area of two metals. It is caused by very slight oscillations, vibrations or slip between the metal surfaces. Fretting corrosion is a risk for bearings and it typically occurs in the loose fit between the outer ring and the housing or between the inner ring and shaft. Uneven bearing seats and too loose fits can increase fretting corrosion. Repairing corrosion damages requires overhauling of the contact area and poses further risks of improper bearing seating. Fretting corrosion is also a risk for other metal contact areas for example yokes and core of SKF Induction Heaters and SKF Vibracon. SKF LGAF 3E is a greasy, smooth paste with special additives to form a protective layer between the metal surfaces and reduce fretting corrosion in these and more applications. Available pack sizes Packsize

 Open the catalog to page 1
Anti-fretting agent LGAF 3E-2

skf.com | mapro.skf.com | skf.com/lubrication ® SKF is a registered trademark of the SKF Group. © SKF Group 2019 The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein. PUB MP/P8 13519 EN · March 2019

 Open the catalog to page 2

All SKF Maintenance,Lubrication and Power Transmission catalogs and technical brochures

  1. TKBA 21

    2  Pages

  2. THHP 300

    2  Pages

  3. SKF 728619 E

    188  Pages

  4. SKF TMJL 100

    136  Pages

  5. SKF 729124

    136  Pages

Archived catalogs

  1. SKF Vibracon

    8  Pages

  2. SKF TWIM 15

    4  Pages

  3. SKF Gloves

    2  Pages

  4. SKF Couplings

    112  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.