| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | SKF Product Data Sheei | | |
| | | |
| | | LGWM1 SKF extreme pressure low temperature bearing grease LGWM 1 is a mineral oil based grease using a lithium soap and containing extreme pressure additives. It is extremely suitable for the lubrication of bearings operating under both radial and axial loads e.g. transport screws. | | |
| | | Bearing operating conditions Temperature Speed Load Vertical shaft Fast outer ring rotation Oscillating movements Severe vibrations Shock load or frequent start-up Low noise Low friction Rust inhibiting properties + = Recommended O = Suitable Available pack sizes LGWM 1 420 ml cartridge 5 kg can 180 kg drum | | |
| | | Low to medium Low to medium High | | |
| | | |
| | | |
| | | • Good oil film formation at low temperatures down to -30 °C (-22 °F) • Good pumpability at low temperature • Good corrosion protection • Good water resistance Typical applications: • Typicalapplications • Windmills • Centralised lubrication systems | | |
| | | + + | | |
| | | |
| | | + = Notsuitable | | |
| | | |
| | | 50 kg drum | | |
| | | |
| | | |
| | | |
| | | Technical data Designations LGWM 1 DIN 51825 code KP1G-30 NLGI consistency class 1 | | |
| | | Water resistance DIN 51 807/l,3hrs at90 °C Oil separation DIN 51 817, 7 days at 40 °C, static, % Lubrication ability SKF R2F, running test B Copper corrosion DIN 51 811,100 °C Rolling bearing grease life SKF R0F test L50 life at 10 000 rpm, hrs EP performance Wear scar DIN 51350/5,1 400 N, mm 4-ball test, welding load DIN 51350/4 Fretting corrosion ASTM D4170 (mg) Designation * Typical value | | |
| | | 1 max. | | |
| | | |
| | | |
| | | Soap type Colour Base oil type Operating temperature range, °C (°F) Dropping point DIN ISO 2176, °C (°F) Base oil viscosity: 40 °C, mm2/s 100 °C, mm2/s Penetration DIN ISO 2137: 60 strokes, 10-1 mm 100 000 strokes, 10-1 mm Mechanical stability: Roll stability, 50 hrs at 80 °C, 10-1 mm Roll stability, 72 hrs at 100 °C, 10-1 mm SKFV2Ftest Corrosion protection: SKF Emcor - standard ISO 11007 - water washout test -salt wateriest (lOOXseawater) SKF Maintenance Products | | Lithium Brown Mineral -30toll0 (-22to 230) >170(338) 200 16 310 - 340 +50 max. | | |
| | | 8 - 13 | | |
| | | |
| | | 2 max. | | |
| | | |
| | | 1,8 max. 3 200 min.* 5,5 * LGWMl/(packsize) | | |
| | | |
| | | |
| | | |
| | | 0 - 0 0 - 0 | | |
| | | |
| | | In line with our policy of continuous development of our products we reserve the right to alter any part of the above specification without prior notice. Although care has been taken to ensure the accuracy of this publication, SKF does not assume any liability for errors or omissions. ® SKF is a registered trademark of the SKF Group | | |
| | | |
| | | ©Copyright SKF 2007/01 | | www.mapro.skf.com www.skf.com/mount | | |
| | | |
| | | |
| | | |
| | | | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |