| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | :>m- rroaua uata ^neei | | |
| | | |
| | | Re-lubrication | | |
| | | |
| | | LGMT3 SKF general purpose industrial and automotive bearing grease LGMT 3 is mineral oil based lithium soap thickened grease. This premium quality, general purposes grease is suitable for a wide range of industrial and automotive applications. | | |
| | | Bearing operating conditions Temperature Speed Load Vertical shaft Fast outer ring rotation Oscillating movements Severe vibrations Shock load or frequent start-up Low noise Low friction Rust inhibiting properties + = Recommended O = Suitable Available packsizes LGMT 3 | | |
| | | Medium Medium Lowto Medium + O + | | |
| | | |
| | | • Excellent rust inhibiting properties • High oxidation stability within its recommended temperature range Typical applications: • Bearings >100 mm (3,9 in) shaft size • Outer bearing ring rotation • Vertical shaft applications • Continuous high ambient temperatures >35 °C (95 °F) • Propellershafts • Agricultural equipment • Largeelectricmotors | | |
| | | |
| | | o o = Notsuitable | | |
| | | |
| | | |
| | | |
| | | 420 ml cartridge 18 kg can | | 1 kg can 50 kg drum | | 5 kg can 180 kg drum | | |
| | | |
| | | Technical data Designations LGMT 3 DIN 51825 code K3K-30 NLGI consistency class 3 | | |
| | | Water resistance DIN 51 807/l,3hrs at90 °C Oil separation DIN 51 817, 7 days at 40 °C, static, % Lubrication ability SKF R2F, running test B at 120 °C Copper corrosion DIN 51 811,110°C Rolling bearing grease life SKF R0F test L50 life at 10 000 rpm, hrs EP performance Wear scar DIN 51350/5,1 400 N, mm 4-ball test, welding load DIN 51350/4 Fretting corrosion ASTM D4170 (mg) Designation * Typical value | | |
| | | 2 max. 1 - 3 Pass 2 max. 1000 min.atl30°C (266 °F) | | |
| | | |
| | | Soap type Colour Base oil type Operating temperature range, °C (°F) Dropping point DIN ISO 2176, °C (°F) Base oil viscosity: 40 °C, mm2/s 100 °C, mm2/s Penetration DIN ISO 2137: 60 strokes, 10-1 mm 100 000 strokes, 10-1 mm Mechanical stability: Roll stability, 50 hrs at 80 °C, 10-1 mm SKFV2Ftest Corrosion protection: SKF Emcor: - standard ISO 11007 - water washout test -salt wateriest (lOOXseawater) | | Lithium Amber Mineral -30tol20(-22 to 250) 180min.(356 min.) 120-130 12 220 - 250 280 max. 295 max. 'M' | | |
| | | |
| | | LGMT 3/(packsize) | | |
| | | |
| | | |
| | | |
| | | 0 - 0 0 - 0 | | |
| | | |
| | | |
| | | SKF Maintenance Products | | |
| | | In line with our policy of continuous development of our products we reserve the right to alter any part of the above specification without prior notice. Although care has been taken to ensure the accuracy of this publication. SKF does not assume any liability for errors or omissions. ® SKF is a registered trademark of the SKF Group | | |
| | | |
| | | ©Copyright SKF 2007/01 | | |
| | | www.mapro.skf.com www.skf.com/mount | | |
| | | |
| | | |
| | | |
| | | | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |