| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | SKF Product Dai | | |
| | | |
| | | LGHP 2 SKF high performance, high temperature bearing grease LGHP 2 is premium quality mineral oil based grease, using a modern Polyurea (di-urea) thickener. It is suitable for ball (and roller) bearings required to run extremely quiet, operating at a wide temperature range from -40 °C (-40 °F) up to 150 °C (302 °F), at medium to high speeds. | | |
| | | LGHP 2 SKF Bearing gréas* | | |
| | | |
| | | |
| | | • Extremely long life at high temperature • Wide temperature range • Excellent corrosion protection • High thermal stability • Good low temperature start-up performance • Compatibility with common Polyurea greases • Compatibility with lithium complex thickened greases • Low noise characteristics • Very good mechanical stability Typical applications: • Waterpumps • Clutch release bearings • Vertical shaft applications • Kilntrucksandrollers • Vibrating applications | | |
| | | Bearing operating conditions Temperature Speed Load Vertical shaft Fast outer ring rotation Oscillating movements Severe vibrations Shock load or frequent start-up Low noise Low friction Rust inhibiting properties + = Recommended O = Suitable Available packsizes LGHP 2 SYSTEM 24 420 ml cartridge 5 kg can 18 kg can | | |
| | | Medium to high Medium to high Low to medium + | | |
| | | |
| | | + O + O + = Notsuitable | | |
| | | |
| | | 1 kg can 50 kg drum | | |
| | | |
| | | |
| | | Technical data Designations DIN 51825 code NLGI consistency class Soap type Colour Base oil type Operating temperature range, °C (°F) Dropping point DIN ISO 2176, °C (°F) Base oil viscosity: 40 °C, mm2/s 100 °C, mm2/s Penetration DIN ISO 2137: 60 strokes, 10-1 mm 100 000 strokes, 10-1 mm Mechanical stability: Roll stability, 50 hrs at 80 °C, 10-1 mm SKFV2Ftest Corrosion protection: SKF Emcor: - standard ISO 11007 - water washout test -salt wateriest (lOOXseawater) | | |
| | | LGHP 2 K2N-40 2-3 Di-urea complex Blue Mineral -40 tol50(-40 to 300) 240 min.(464 min.) 96 10,5 245 - 275 365 max. 365 max. | | |
| | | Water resistance DIN 51 807/l,3hrs at90 °C Oil separation DIN 51 817, 7 days at 40 °C, static, % Lubrication ability SKF R2F, running test B at 120 °C Copper corrosion DIN 51 811,110 °C Rolling bearing grease life SKF R0F test L50 life at 10 000 rpm, hrs EP performance Wear scar DIN 51350/5,1 400 N, mm 4-ball test, welding load DIN 51350/4 Fretting corrosion ASTM D4170 (mg) Designation * Typical value | | |
| | | 1 max. | | |
| | | |
| | | 1 - 5 | | |
| | | |
| | | Pass | | |
| | | |
| | | 1 max. | | |
| | | |
| | | 1 000 min.atl50°C (302 °F) | | |
| | | |
| | | 7 * LGHP2/(packsize) | | |
| | | |
| | | |
| | | |
| | | 0 - 0 0 - 0 0 - 0 | | |
| | | |
| | | |
| | | SKF Maintenance ProdUCtS Inline with our policy of continuous development of our products we reserve the right to alter any part of the above specification without prior notice. Although care has been taken to ensure the accuracy of this © Copyright SKF 2007/01 www.mapro.skf.com publication. SKF does not assume any liability for errors or omissions. www.skf.com/mount ® SKF is a registered trademark of the SKF Group | | |
| | | |
| | | | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |