| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | SKF Product Data Shee | | |
| | | |
| | | LGGB2 SKF green biodegradable bearing grease LGGB 2 is biodegradable, low toxicity, synthetic ester oil based grease using a lithium-calcium thickener. It has excellent lubrication properties for a wide range of applications operating under different conditions. | | |
| | | |
| | | Bearing operating conditions Temperature Speed Load Vertical shaft Fast outer ring rotation Oscillating movements Severe vibrations Shock load or frequent start-up Low noise Low friction Rust inhibiting properties + = Recommended O = Suitable Available packsizes LGGB 2 SYSTEM 24 420 ml cartridge 5 kg can 18 kg can 180 kg drum | | |
| | | Low to medium Low to medium Medium to high O + + + | | |
| | | • Compliance with current regulations on toxicity and biodegradability • Good low temperature start-up performance • Good corrosion inhibiting properties • Suitable for medium to high loads Typical applications: • Agricultural and forestry equipment • Construction and earthmoving equipment • Water treatment and irrigation • Locks, dams, bridges • Linkages.rodends • Other applications where contamination of the environment is a concern | | |
| | | |
| | | + = Notsuitable | | |
| | | |
| | | |
| | | |
| | | Technical data Designations LGGB 2 DIN 51825 code KPE 2K-40 NLGI consistency class 2 | | |
| | | Water resistance DIN 51 807/l,3hrs at90 °C Oil separation DIN 51 817, 7 days at 40 °C, static, % Lubrication ability SKF R2F, running test B Copper corrosion DIN 51 811,100 °C Rolling bearing grease life SKF R0F test L50 life at 10 000 rpm, hrs EP performance Wear scar DIN 51350/5,1 400 N, mm 4-ball test, welding load DIN 51350/4 Fretting corrosion ASTM D4170 (mg) Designation * Typical value | | |
| | | 0 max. 0,8 - 3 Pass atl00°C* (212°F) > 300 atl20°C (250 °F) 1,8 max. 2 600 min. LGGB2/(packsize) | | |
| | | |
| | | Lithium /calcium Offwhite Synthetic -40tol20(-40to 250) >170 (>338) 110 13 265 - 295 +50max. (325 max.) +70max. (350 max.) | | |
| | | Soap type Colour Base oil type Operating temperature range, °C (°F) Dropping point DIN ISO 2176, °C (°F) Base oil viscosity: 40 °C, mm2/s 100 °C, mm2/s Penetration DIN ISO 2137: 60 strokes, 10-1 mm 100 000 strokes, 10-1 mm Mechanical stability: Roll stability, 50 hrs at 80 °C, 10-1 mm Roll stability, 72 hrs at 100 °C, 10-1 mm SKFV2Ftest Corrosion protection: SKF Emcor: - standard ISO 11007 - water washout test -salt wateriest (lOOXseawater) | | |
| | | |
| | | |
| | | |
| | | 0 - 0 | | |
| | | |
| | | |
| | | SKF Maintenance Products | | |
| | | In line with our policy of continuous development of our products we reserve the right to alter any part of the above specification without prior notice. Although care has been taken to ensure the accuracy of this publication. SKF does not assume any liability for errors or omissions. ® SKF is a registered trademark of the SKF Group | | |
| | | |
| | | ©Copyright SKF 2007/01 | | |
| | | www.mapro.skf.com www.skf.com/mount | | |
| | | |
| | | |
| | | |
| | | | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |