| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | :>m- rroaua uaia ^neei | | |
| | | |
| | | Re-lubrication | | |
| | | |
| | | LGFP2 SKF food compatible bearing grease LGFP 2 is clean, non-toxic bearing grease, which is based on medical white oil using an aluminium complex soap. LGFP 2 is N5F* HI** certified for use where incidental contact with food cannot be excluded. | | |
| | | |
| | | Bearing operating conditions Temperature Speed Load Vertical shaft Fast outer ring rotation Oscillating movements Severe vibrations Shock load or frequent start-up Low noise Low friction Rust inhibiting properties + = Recommended O = Suitable Available packsizes LGFP 2 SYSTEM 24 1 kg can 180 kg drum | | |
| | | Medium Medium Lowto Medium O | | |
| | | • NSF HI certified • High resistance to water washout making it suitable for applications subject to frequent wash down • Excellent grease life • Excellent corrosion resistance • An essentially neutral pH value Typical applications: • Bakeryequipment • Food processing equipment • Multi-pack cassette bearings • Conveyorbearings • Bottlingmachines • NSF-National Sanitation Foundation ** HI - Incidental Contact with Food | | |
| | | |
| | | O + = Notsuitable | | |
| | | |
| | | 420 ml cartridge 18 kg can | | |
| | | |
| | | |
| | | |
| | | Technical data Designations LGFP 2 DIN 51825 code K2G-20 NLGI consistency class 2 | | |
| | | Water resistance DIN 51 807/l,3hrs at90 °C Oil separation DIN 51 817, 7 days at 40 °C, static, % Lubrication ability SKFR2F,runningtestBatl20°C Copper corrosion DIN 51 811,110°C Rolling bearing grease life SKF R0F test L50 life at 10 000 rpm, hrs EP performance Wear scar DIN 51350/5,1 400 N, mm 4-ball test, welding load DIN 51350/4 Fretting corrosion ASTM D4170 (mg) Shelf life Food compatibility NSF certified Designation | | |
| | | 1 max. | | |
| | | |
| | | |
| | | Soap type Colour Base oil type Operating temperature range, °C (°F) Dropping point DIN ISO 2176, °C (°F) Base oil viscosity: 40 °C, mm2/s 100 °C, mm2/s Penetration DIN ISO 2137: 60 strokes, 10-1 mm 100 000 strokes, 10-1 mm Mechanical stability: Roll stability, 50 hrs at 80 °C, 10-1 mm SKFV2Ftest Corrosion protection: SKF Emcor: - standard ISO 11007 - water washout test -salt wateriest (lOOXseawater) | | Aluminium Transparent Medicalwhite oil -20toll0 (-4 to 230) 250 min.(482 min.) 130 7,3 265 - 295 +30 max. | | |
| | | 1 - 5 | | |
| | | |
| | | 1 000 atllO °C (230 °F) | | |
| | | |
| | | 1100 min. | | |
| | | |
| | | |
| | | 2 years HI (reg.nr:128004) LGFP2/(packsize) | | |
| | | 0 - 0 | | |
| | | |
| | | |
| | | |
| | | SKF Maintenance ProdUCtS The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless permission is granted. Every care has been taken to ensure the accuracy of the information contained in this © Copyright SKF 2007/01 www.mapro.skf.com publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising www.skf.com/mount outofuse of the information contained herein. ® SKF is a registered trademark of the SKF Group | | |
| | | |
| | | | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |