| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | SKF Product Data Shee | | |
| | | |
| | | LGFL1 SKF food compatible, low temperature bearing grease LGFL1 is PAO/Ester based bearing grease using an aluminum complex soap. LGFL 1 exhibits excellent lubrication ability at low temperature or high speed and is N5F* HI** certified for use where incidental contact with food cannot be excluded. • NSF HI certified • High resistance to oxidation • Excellent corrosion protection Typical applications: • Any bearing operating at low temperature or high speed • Freezing tunnels • Grinders • NSF-National Sanitation Foundation ** HI - Incidental contact with Food | | |
| | | Bearing operating conditions Temperature Speed Load Vertical shaft Fast outer ring rotation Oscillating movements Severe vibrations Shock load or frequent start-up Low noise Low friction Rust inhibiting properties + = Recommended O = Suitable Available packsizes LGFL 1 1 kg can 180 kg drum | | |
| | | Low to medium Medium to extremely high Low | | |
| | | |
| | | + = Notsuitable | | |
| | | |
| | | 420 ml cartridge 18 kg can | | |
| | | |
| | | |
| | | |
| | | Technical data Designation DIN 51825 code | | |
| | | LGFL 1 KE/HC1K-40 | | |
| | | Water resistance DIN 51 807/l,3hrs at90 °C Oil separation DIN 51 817, 7 days at 40 °C, static, % Lubricating ability SKF R2F, running test B at 120 °C Copper corrosion DIN 51 811,100 °C Rolling bearing grease life SKF R0F test L50 life at 10 000 rpm, hrs EP performance Wear scar, DIN 51350/5,1 400 N, mm 4 ball test, welding load, DIN 51350/4 | | |
| | | |
| | | |
| | | 1 max. 15 max. 2 max. 1 000 min. atllO °C (230 °F)* | | |
| | | NLGI consistency class 1 | | |
| | | |
| | | Soap type Colour Base oil type Operating temperature range, °C (°F) Dropping point DIN ISO 2176, °C (°F) Base oil viscosity 40 °C, mm2/s 100 °C, mm2/s Penetration DIN ISO 2137 60 strokes, 10-1 mm 100 000 strokes, 1Q-1 mm | | aluminium complex White PAO/Ester -45 tol20(-49 to 248) 220 min.(428 min.) 30 6 310 - 340 +50 max. | | |
| | | |
| | | |
| | | |
| | | |
| | | Mechanical stability Fretting corrosion Rollstability,50hoursat80°C,changelO-1mm - ASTMD4170(mg) SKFV2Ftest she|f|ife | | |
| | | 2 years Hl(reg.nr:137588) LGFLl/(packsize) | | |
| | | |
| | | Corrosion protection SKF Emcor: | | Food compatibility NSF cerified | | |
| | | |
| | | |
| | | Standard ISO 11007 0 - 0 Water washout test - Designation Saltwatertest(lOOXseawater) - * Typical value | | |
| | | |
| | | |
| | | SKF Maintenance Products | | |
| | | The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of use of the information contained herein. ® SKF is a registered trademark of the SKF Group | | |
| | | |
| | | ©Copyright SKF 2006/10 | | |
| | | www.mapro.skf.com www.skf.com/mount | | |
| | | |
| | | |
| | | |
| | | | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |