| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | SKF Product Data Shee | | |
| | | |
| | | LGFB2 SKF food compatible, high load bearing grease LGFB 2 is PAO/Ester based bearing grease using an aluminum complex soap. LGFB 2 exhibits excellent lubrication ability at high loads and is N5F* HI** certified for use where incidental contact with food cannot be excluded. | | |
| | | |
| | | Bearing operating conditions Temperature Speed Load Vertical shaft Fast outer ring rotation Oscillating movements Severe vibrations Shock load or frequent start-up Low noise Low friction Rust inhibiting properties + = Recommended O = Suitable Available packsizes LGFB 2 SYSTEM 24 420 ml cartridge 1 kg can 18 kg can | | |
| | | Medium Medium Medium to high O O + + | | |
| | | • NSF HI certified • Resistanttovibration • High resistance to oxidation • Shock loads suitability • Excellent corrosion protection • Highwaterresistance Typical applications: • Any bearing operating under high loads, severe vibrations or shock loads • Mixers • Slicing machines • NSF-National Sanitation Foundation ** HI - Incidental contact with Food | | |
| | | |
| | | + = Notsuitable | | |
| | | |
| | | 180 kg drum | | |
| | | |
| | | |
| | | Technical data Designation DIN 51825 code | | |
| | | LGFB 2 KPE/HC2K-20L | | |
| | | Water resistance DIN 51 807/l,3hrs at90 °C Oil separation DIN 51 817, 7 days at 40 °C, static, % Lubricating ability SKF R2F, running test B at 120 °C Copper corrosion DIN 51 811,100 °C Rolling bearing grease life SKF R0F test L50 life at 10 000 rpm, hrs EP performance Wear scar, DIN 51350/5,1 000 N, mm 4 ball test, welding load, DIN 51350/4 Fretting corrosion ASTM D4170 (mg) Shelf life Food compatibility NSF certified Designation * Typical value | | |
| | | |
| | | |
| | | 1 max. 1-5 max. 2 max. 1 000 min. atllO °C (230 °F)* 1.6 max. 1 800 N min. | | |
| | | NLGI consistency class 2 | | |
| | | |
| | | Soap type Colour Base oil type Operating temperature range, °C (°F) Dropping point DIN ISO 2176, °C (°F) Base oil viscosity 40 °C, mm2/s 100 °C, mm2/s Penetration DIN ISO 2137 60 strokes, 10-1 mm 100 000 strokes, 10-1 mm Mechanical stability Roll stability, 2 hours at 70 °C, change 10-1 mm SKFV2Ftest Corrosion protection SKF Emcor: Standard ISO 11007 Water washout test Saltwatertest (lOOXseawater) | | aluminium complex Beige PAO/Ester -25tol20(-13to 248) 220 min.(428 min.) 266 29 265 - 295 +50 max. +29* | | |
| | | |
| | | |
| | | 2 years Hl(reg.nr:137587) LGFB2/(packsize) | | |
| | | 0-0 | | |
| | | |
| | | |
| | | |
| | | |
| | | SKF Maintenance Products | | |
| | | The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of use of the information contained herein. ® SKF is a registered trademark of the SKF Group | | |
| | | |
| | | ©Copyright SKF 2007/02 | | |
| | | www.mapro.skf.com www.skf.com/mount | | |
| | | |
| | | |
| | | |
| | | | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |