| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | :>m- rroaua uaia ^neei | | |
| | | |
| | | Re-lubrication | | |
| | | |
| | | LGEV2 SKF Extremely high viscosity bearing grease with solid lubricants LGEV 2 is a premium quality, extremely high viscosity, mineral oil based grease using a lithium-calcium soap containing molybdenum disulphide and graphite. | | |
| | | |
| | | Bearing operating conditions Temperature Speed Load Vertical shaft Fast outer ring rotation Oscillating movements Severe vibrations Shock load or frequent start-up Low noise Low friction Rust inhibiting properties + = Recommended O = Suitable Available pack sizes LGEV 2 35 g tube 420 ml cartridge 18 kg can 50 kg drum | | |
| | | Medium Very low High to very high O + + + | | |
| | | • Excellent lubrication properties due to the inclusion of molybdenum disulphide and graphite solid • Extremely suitable for lubricating large sized spherical roller bearings subject to high loads and slow rotations, a situation where microslip is likely to occur • Extremely mechanically stable providing good water resistance and corrosion protection Typical applications: • Trunnion bearings on rotating drums • High pressure roller mills • Crushers | | |
| | | |
| | | + = Notsuitable | | |
| | | |
| | | 5 kg can 180 kg drum | | |
| | | |
| | | |
| | | Technical data Designations LGEV 2 DIN 51825 code KPF2K-10 NLGI consistency class 2 | | |
| | | Water resistance DIN 51 807/l,3hrs at90 °C Oil separation DIN 51 817, 7 days at 40 °C, static, % Lubrication ability SKF R2F, running test B Copper corrosion DIN 51 811,100 °C Rolling bearing grease life SKF R0F test L50 life at 10 000 rpm, hrs EP performance Wear scar DIN 51350/5,1 400 N, mm 4-ball test, welding load DIN 51350/4 Fretting corrosion ASTM D4170 (mg) Designation * Typical value | | |
| | | 1 max. | | |
| | | |
| | | |
| | | Soap type Colour Base oil type Operating temperature range, °C (°F) Dropping point DIN ISO 2176, °C (°F) Base oil viscosity: 40 °C, mm2/s 100 °C, mm2/s Penetration DIN ISO 2137: 60 strokes, 10-1 mm 100 000 strokes, 10-1 mm Mechanical stability: Roll stability, 50 hrs at 80 °C, 10-1 mm Roll stability, 72 hrs at 100 °C, 10-1 mm SKFV2Ftest Corrosion protection: SKF Emcor - standard ISO 11007 - water washout test -salt wateriest (lOOXseawater) SKF Maintenance Products | | Lithium-calcium Black Mineral -10tol20(14to 250) >180(356) 1020 58 265 - 295 325 max. | | |
| | | 1 - 5 | | |
| | | |
| | | Imax. (90 °C/194°F) | | |
| | | |
| | | 1,2 max. 3 000 min. | | |
| | | |
| | | |
| | | LGEV2/(packsize) | | |
| | | +50 max. 'M' | | |
| | | |
| | | |
| | | |
| | | 0 - 0 0 - 0* 0 - 0* | | |
| | | |
| | | In line with our policy of continuous development of our products we reserve the right to alter any part of the above specification without prior notice. Although care has been taken to ensure the accuracy of this publication, SKF does not assume any liability for errors or omissions. ® SKF is a registered trademark of the SKF Group | | |
| | | |
| | | ©Copyright SKF 2007/01 | | www.mapro.skf.com www.skf.com/mount | | |
| | | |
| | | |
| | | |
| | | | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |