| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | 13 Induction coil outside the heater's housing allows shorter heating time and lower energy consumption 10 Foldable bearing support arms facilitate the heating of larger diameter bearings ID Easy-to-use control panel and LED display integrated in a remote control 9 Internal storage for all 3 yokes reduces the risk of yoke damage or loss a Integrated carrying handle facilitates portability | | |
| | | |
| | | Technical data Designation SKF m20 performance Voltage, V/Hz Work piece: - Maximum weight - Maximum bore diameter - Range - Magnetic probe -Accuracy (electronics) | | |
| | | TI H 030M 28 kg (61,7 lb) 230V/50-60Hzor 110V/50-60Hz 40 kg (88 lb) 20-300 mm (0,8-11,8 in) 0-250 °C (32 -482 °F) Yes, K-type ±2°C (± 3,6 °F) | | |
| | | Control panel Operating area (w « h) Coil diameter Dimensions (w* d *h) Total weight, including yokes Maximum power consumption Number of standard yokes Standard yokes | | Key board with LED in remote control 100 * 135 mm (3,9 * 5,3 in) 95 mm (3,7 in) 450 x 195 x 210 mm (17,7 x 7,6 x 8,2 in) 20,9 kg (46 lb) 2,0 kVA | | |
| | | |
| | | |
| | | 3 | | |
| | | |
| | | Time control: -Range -Accuracy Maximum temperature (approx.) Thermometer mode Bearing mode Power reduction Demagnetisation according to SKF norms (automatic) Can heat sealed bearings | | |
| | | 45 x 45 x 215 mm (1,7 x 1,7 x 8,4 in), for heating bearingswith bore diameterof65mm(2,6in) and larger 28 x 28 x 215 mm (1,1 x 1,1 x 8,4 in), for heating bearingswith bore diameterof40mm(l,6in) and larger 14 x 14 x 215 mm (0,5 x 0,5 x 8,4 in), for heating bearingswith bore diameterof20mm (0,8 in) and larger 45 x 45 mm (1,7x1,7 in) Yes, foldable No No No Steel and glass filled polyamide 3 years | | |
| | | 0-60 minutes ± 0,01 sec. 400 °C (750 °F) Yes Yes 2-step; 50-100% Yes (<2 A/cm) Yes | | |
| | | |
| | | Core cross section Yoke storage Sliding arm Swivel arm Cooling fan Housing material Warranty period | | |
| | | |
| | | |
| | | Can heat pre - greased bearings Yes Error guiding codes Yes Thermal overload protection Yes Maximum magnetic flux 1,7 T | | |
| | | |
| | | |
| | | ©SKF group 2007/08 ® SKF is a registered trademark of the SKF Group | | |
| | | SKF Maintenance Pro ducts | | |
| | | |
| | | |
| | | www.mapro.skf.com www.skf.com/mount | | |
| | | The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct, Indirect or consequential arising out of use of the Information contained herein. | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |