| | | | | | | | | | | | | | | | | | | |
| | | |
| | | SKF Product Data Sheet | | |
| | | |
| | | Blind housing puller kitTMBP 20E Removes bearing without dismantling machinery | | |
| | | |
| | | The SKF TMBP 20E is an adapter type puller for dismounting deep groove ball bearings in blind housings (i.e. when accessing the ball bearing is not possible through the outer ring or through the bore) with shaft dimensions between 30 mm and 160 mm (1.18 in and 6.3 in). The use of extension rods allows a long reach of up to 583 mm (23 in). | | |
| | | |
| | | • Wi'li 6 iet-j of adaptors, a wide of range • New ball adapters are more durable • Spanner stop funriio'i on girdle "or easy and safe handling | | • Spt'ïia: ™» ijii'lL' hijbi, I- r-iir rr:i;iii(| | | |
| | | |
| | | |
| | | (ion of bolt cage. Clean in the bearing raceway. H Insert the second adopter into prepared art::: sAo .'■>:>; i .';:.'.'''>' skss?;:. | | |
| | | |
| | | Technical data | | |
| | | |
| | | | | | | | | | | | | Arm length | 1S3 mm (7.2 in) | Kit contents | Adapters size A to f (2 pes | ach) | | | | | 200 mm (7.9 in) | | 2, main rod, [with nut sup | | | | | | | | rings and nuts) | | | | | iinr-: w.i-n^n wcci! | 583 mm (23.0 in) | | | | | | | Maximum pulling 1er« | 55 KM (6.2 ton US) | | | | | | | | 155Nm(114lbfft) | | | | | | | Spindle head AF size | 22 mm | | Beam | | | | | | 395 • 300. ids mm | | IFUcard | | | | | | (15.5 • ILS ■ 4.1 in) | | Carrying case | | | | | | 7,5 kg (16.5 lb| | Spare parto | | | | | | | | tmbp2o£-i | Spindle with nose place | | | | | | | | Spindle grease | | | | | | | | | | | | | |
| | | |
| | | | | |
| | | |
| | | | | | | | | | | | | | | | | | | |