| | | Integrated industrial hydraulic cylinder, pump and spindle - no separate pump is required Safety valve helps prevent overloading the spindle and the puller in case excessive force is applied Spring-loaded centre point in the nosepiece allows easy centring of the puller on the shaft without damaging shaft centre point | | Hand lever with ergonomic grip can be rotated 360° Hardened and chrome plated piston with spring return function Extension pieces included allows easy adaptation for the required pulling length | | |
| | | TMHS 75: • The TMHS 75 has a maximum withdrawal force of 75 kN (8.4 ton (US)) and a long stroke length of 75 mm (3.0 in), which allows dismounting in one operation • Suitable for use with any puller equipped with a UN 11/4" * 12 tpi threading that can be used up to the maximum force of 75 kN (8.4 ton (US)) • Delivered with a 50 (2.0 in) and 100 mm (3.9 in) extension piece | | MHS 100: The TMHS 100 has a maximum withdrawal force oflOO kN (11.2 ton (US)) and a long stroke of 80 mm (3.1 in), which allows dismounting in one operation Suitable for use with any puller equipped with a UN 11/2" * 16 tpi threading that can be used up to the maximum force of 100 kN (11.2 ton (US)) Delivered with a 50 (2.0 in), 100 mm (3.9 in) and 150 mm (5.9 in) extension piece | | |