| | | • High load rating oflOO kN (11.2 ton US) makes the puller suitable for a variety of dismountingjobs • The 3 different arm sizes, with a maximum effective arm length of 200 mm (7.9 in), make the TMHP 10E suitable for use in a wide range of applications | | |
| | | • The self-locking arms minimise the risk of the puller slipping from the application when under load • Hydraulic spindle facilitates effortless dismounting • The hydraulic spindle is equipped with a safety valve, which minimises the risk of puller overload by limiting the applied force to 100 kN (11.2 ton US) | | • Long stroke of hydraulic spindle, 80 mm (3.1 in), facilitates dismounting in one operation • Extension pieces ofthe hydraulic spindle allow quick adaptation to pulling length. • The spring-loaded centre point of the hydraulic spindle allows easy centring of the puller on the shaft without damaging it | | |