Catalogues - skf-dismounting - skf-maintenance-and-lubrication-products

Catalogue SKF - Dismounting

www.mapro.skf.com

Page

/ 20

Request
a Quote

SKF Maintenance and Lubrication Products - 2158, 39726

/ 20

See other catalogues for SKF Maintenance and Lubrication Products

Text version of the page

Technical data

Designation Description Contents

TMBS 5UE

TMBS 100E_

Advanced hydraulic strong back puller

1 x separator set

2 x main rods

2 x extension rods, 125 mm (4.9 in) 4xextension rods, 285 mm(11.2 in)

1 x beam

IxhydraulicspindleTMHSlOO

2 x extension pieces for hydraulic spindle; 50,100 mm(2.0, 3.9 in)

1 x nosepiece with centre point for

hydraulic spindle

80 mm (3.1 in)

100 kN (11.2 US ton force)

825 mm(32.5in)

20 - 100 mm(0.8-4in)

13,5 kg (29.8 1b)

Minimum 5000 cycles up to 100 kN

(11.2 US ton force)

UN l!"xl6 tpi

105 kN (11.8 US ton force)

580 x410x 70 mm(23xl6x2.8in)

Maximum stroke Nominal working force Maximum reach Shaft diameter range Weight

Cycle life hydraulic cylinder

Threading hydraulic cylinder

Safety valve setting hydraulic cylinder

Carrying case dimensions

TMBS1UUE

Technical data

Designation Description Contents

TMBS 150E_

Advanced hydraulic strong back puller

1 x separator set

2 x main rods

2 x extension rods, 125 mm (4.9 in) 4xextension rods, 285 mm(11.2 in)

1 x beam

IxhydraulicspindleTMHSlOO

2 x extension pieces for hydraulic spindle; 50,100 mm(2.0, 3.9 in)

1 x nosepiece with centre point for

hydraulic spindle

80 mm (3.1 in)

100 kN (11.2 US ton force)

825 mm(32.5in)

35 - 150 mm(1.4-6in)

17 kg (37.5 lb)

Minimum 5000 cycles up to 100 kN

(11.2 US ton force)

UN l!"xl6 tpi

105 kN (11.8 US ton force)

580 x410x 70 mm(23xl6x2.8in)

TMBS150E

Maximum stroke Nominal working force Maximum reach Shaft diameter range Weight

Cycle life hydraulic cylinder

Threading hydraulic cylinder

Safety valve setting hydraulic cylinder

Carrying case dimensions

Part identification

Designation

TMHS100 TMHS 100

TMHS 8T TMHS 8T

Description

Advanced hydraulic spindle, 100 kN Set of extension pieces for the hydraulic spindle, nose piece Beam

Main rods, nuts, washers (set) Extension rodsl25mm/4.9in(2pcs) Extension rods 285 mm/11.2 in (4pcs) Separator(complete)

TMBS100E-1 TMBS100E-2 TMBS100E-3 TMBS100E-4 TMBS100E-5

TMBS 150E-1 TMBS 100E-2 TMBS 100E-3 TMBS 100E-4 TMBS 150E-5

5KF Maintenance Products

In line with our policy of continuous development of our products we reserve the right to alter any part of the above specification without prior notice. Although care has been taken to ensure the accuracy of this publication, SKF does not assume any liability for errors or omissions.

www.mapro.skf.com www.skf.com/mount