| | | The SKF Combi kitTMMK 10-35 is designed for quick and precise mounting of industrial bearings with bore diameters from 10 to 35 mm and for dismounting deep groove ball bearings from shafts, housings and blind housings from the same range. For mounting, a multipurpose fitting tool is included which is suitable for mounting bearings as well as bushings, industrial seal rings, belt pulleys and other similar products. For dismounting of deep groove ball bearings from blind housings and shafts, the SKF Combi kit contains a unique three armed puller. When dismounting deep groove ball bearings from housings, a combination of this puller, sliding hammer and support rings enables easy removal of bearings. | | |
| | | All parts are clearly arranged in the case for easy selection and identification The correct combination of impact ring and sleeve helps ensure that mounting forces are not transmitted via the rolling elements of the bearing, minimizing damage to bearing due to incorrect mounting The impact rings are made of high-impact modified polyamide. The impact sleeves are made ofglass fibre-reinforced, high-impact modified polyamide, which is super-tough, strong and lightweight The dead-blow hammer has nylon faces and is steel-shot loaded for maximum impact. The handle, with comfortable rubber-grip for good handling, absorbs shock and vibration | | A complete kit of different sizes puller arms and spindles facilitates the dismounting of up to A9 different SKF deep groove ball bearings The claws are especially designed to facilitate a precise fit in the bearing's raceways, providing good grip and allowing the application of higher dismounting forces The designation is laser-engraved on the arms allowing easy identification and selection | | The industrial springs are colour-coded allowing easy selection and matching Elastic locking ring results in easy connection of puller arms to spindle Heavy sliding weight of the sliding hammer generates a high dismounting force | | |