Text version of the page 
Text version of the page 
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Technical data Designation Measuring units: Type of laser Laser wave length Laser class Maximum laser power Maximum distance between measuring units Type of detectors Fixture | | | | | | TMEA 1/P2.5 1 mW 2,50 m (8,2 ft) Single axis PSD, 10 * 10 mm (0,4 x ,04 in) Chain standard Magnetic optional | | | | | | TMEA2_ Diode laser 670 -675 nm 2 1 mW 0,850 m (2,8 ft) Single axis PSD, 8,5 * 0,9 mm (0,3 x ,04 in) Magnetic and/or chain | | | TMEAlPEx Diode laser 670 - 675 nm 2 1 mW lm(3 ft) Single axis PSD, 10 * 10 mm (0,4 x ,04 in) Chain standard Magnetic optional | | | | | | | | | | | | | | | | | | Display unit: Battery type Operating time Displayed resolution | | | | | | 2 x 1,5V LR14 Alkaline 20 hours continuous operation 0,01 mm (0,1 mil in "inch" setting) | | 3 X 1,5V LR14 Alkaline 20 hours continuous operation 0,01mm(0,lmilin"inch"setting) | | Special type of LR 14 batteries 20 hours continuous operation 0,01mm(0,lmilin"inch"setting) | | | | | | | | | | Complete system: | | | | | | | | | | | | | | | | | | | Content | Display unit | Display unit | Display unit | | | | | 2 measuring units with spirit levels | 2 measuring units with spirit levels | 2 measuring units with spirit levels | | | | | 2 magnetic / mechanical shaft fixtures | 2 mechanical shaft fixtures | 2 mechanical shaftfixtures | | | | | 2 locking chains | 2 locking chains | 2 locking chains | | | | | 5 sets of shims | 2 extension chains | 2 extension chains | | | | | Measuring tape | 5 sets ofshims | 5 sets of shims | | | | | Instructionsforuse | Measuring tape | Measuring tape | | | | | Set ofalignmentreports | Instructionsforuse | Instructions for use | | | | | Carrying case | Set ofalignmentreports Carrying case | Set of alignment reports Carrying case Printer Charger Connection cable Spare paper roll | | | | Shaft diameter range | Magnetic: | | | | | | | 40-500 mm(l,6-20in) | 30 -500 mm (1,2-20 in) | 30 - 500 mm (1,2-20 in) | | | | | Chain: | | | | | | | 40-150 mm (1,6-5,9 in) | | | | | | | Optional chain: 150-500 mm(5,9-20in) | | | | | | Accuracy of system | Betterthan 21 | Betterthan 21 | Betterthan 21 | | | | Ex classification | - | - | II 2 G, EEx ib IIC T4 | | | | Ex certifícate number | - | - | Nemko03ATEX101X | | | | Temperature range | 0-40°C(32 -104°F) | 0-40°C(32-104°F) without printer | 0-40°C(32-104°F) without printer | | | | Operating humidity | < 90 % | <90Xwithoutprinter | < 90 % without printer | | | | Carrying case dimensions | 390 x 340 x 95 mm | 534 x 427 x 157 mm | 534 x 427 x 157 mm | | | | | (15,4x13,4x3,7 in) | (21,0x16,8x6,2 in) | (21,0 x 16,8 x 6,2 in) | | | | Total weight (incl. case) | 3,7 kg (8,1 lb) | 8,9 kg (19,6 lb) | 8,9 kg (19,6 Ib) | | | | Calibration certifícate | Validfortwo years | Valid for two years | Valid for two years | | | | Warranty | 12 months | 12 months | 12 months | | | | Printing capability | No | Yes-printerisoptional | Yes - printer is standard | | | | | | | | | | | | | | | | | | | ©SKF 2007/08 ® SKF is a registered trademark of the SKF Group | | | | | | 5KF Maintenance Products | | | | | | | | | | | | | | www.mapro.skf.com www.skf.com/mount | | | | | | The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless permission is granted Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of use of the information contained herein. | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
|