| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | | | |
| | | |
| | | Professionalism Reliability&Commitment | | |
| | | |
| | | | | |
| | | | | | | |
| | | |
| | Model--------------------Deutz T226B Type-----------Direct injection, turbocharged, water cooled Rated power-------------------------70KW Rated speed-----------------------2200rpm | Type--------------------Front wheel Steering Model of steering pump-------JHP2050AXCC Model of steering redirector------------------ ---------------------BZZ5-E160B+FKB-3022 System pressure 140MPa | Fuel tank------------------------------151L Engine crank case----------------------11L Converter and gear box------------------21L Hydraulic tank-------------------------110L Driving axle(F/R)---------------------7.6/17L | |
| | | |
| | | Main Technical Specification | | | | |
| | | | | |
| | | |
| | | |
| | | |
| | Loading Rated load-------------------------1700Kg Operating weight------------------- 7000Kg Max lifting capability--------------->2500Kg Rated bucket capacity--------------- 1.0m3 Max. breakout force----------------->40KN Max. dump clearance--------------2611mm Dump reach----------------------- 726mm Dump angle at any position----------->43.5o Min. turning radius (outside of rear wheel)----- ---------------------------------- 4440mm Lifting time of bucket ----------- <5.1s Lowering time of bucket---------------<4.9s Dumping time-------------------------<0.9s | Torque Converter Model--------------------------CARRARO Torque ratio----------------------------2.55 Cooling type----------Pressure oil circulating | Overall length(with bucket on ground) -- 7077mm Overall width-----------------------2313mm Overall height(to the top of the cab)----2720mm Overall height(to the top of the digging pole)------ -----------------------------------3424mm Load Bucket width----------------- 2328mm Wheel base----------------------2155.5mm Tread(F/R)--------------------1714/1557mm Ground clearance--------------------275mm | |
| | Gear box Model--------------------------CARRARO Type----------Synchromesh mechanical shift Gear shifts(Forward/Reverse)------------F4/R4 Travelling speed(km/h) Forward/Reverse I--------------------5.8/7.0 Forward/Reverse II-----------------10.5/12.6 Forward/Reverse III-----------------20.1/24.3 Forward/Reverse IV-----------------40.2/48.6 | |
| | | | | |
| | Model---------------------CARRARO(4*4) Type of main reducer----------------------- ---------------spiral bevel gear, single stage Type of final reducer---Single stage planetary Max. steering angle---------------------55° Tyre size(F/R)------12-16.5NHS/19.5L-24R4 | |
| | Digging Rated bucket capacity----------------0.3m3 Max. digging depth---------------- 4338mm Max. digging force------------->50±10%KN Max. digging radius---------------- 5481mm Max. dumping height---------------3737mm | |
| | | | | JHP2050AXCC ------21.1MPa | |
| | | | | |
| | Cummins engine Two wheel drive Hydraulic breaker Side shift | |
| | Model of oil pump---------System pressure--------- | |
| | Model of loading/digging valve---------------- ----------------------ZL20DC-02/ZL30DC-07 | |
| | | |
| | | | | |
| | | | |
| | | SINOWAY INDUSTRIAL (SHANGHAI) CO., LTD. | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |