Catalogs >
SIMEX Sp. z o.o. >
Digital indicator SWS-94 datasheet

Digital indicator SWS-94 datasheet
3Pages

Catalog excerpts

Serial displays SWS-94 indicator with a large, 20 or 13 mm high, LED display RS-485 / Modbus RTU MASTER / SLAVE transmission speed adjustable: 1200 f 115200 bit/sek. display brightness adjustable in 8 steps password protected free configuration software S-Config The SWS-94 is a simple digital panel indicator intended for displaying any numerical values and characters defined by user (in SLAVE mode only) sent from the master device over the RS-485 serial interface link. The displayed value may be collected from other device (in MASTER mode). The display brightness can be adjusted in 8 steps. Modbus RTU protocol is used to communication with device. Baud rate is user defined in 1200 f 115200 baud range. The meter can be configured with the local keyboard or free S-Config software via the RS-485 communication port. SIMEX Ltd., Wielopole 11, 80-556 Gdansk, Poland, tel. (+48) 58 762-07-77, fax 58 762-07-70, www.simex.pl

Open the catalog to page 1

Serial displays QsimEX DIMENSIONS Panel cut-out dimensions SIMEX Ltd., Wielopole 11, 80-556 Gdansk, Poland, tel. (+48) 58 762-07-77, fax 58 762-07-70, www.simex.pl 08 : operating temp. -20°C f +50°C 0P : operating temp. -20°C f +50°C + IP 65 frame 0W : 6 digits 13 mm + operating temp. -20°C f +50°C 0U : 6 digits 13 mm + operating temp. -20°C f +50°C + IP 65 frame

Open the catalog to page 2

Meters accessories SMP-99/94 to mount 96 x 48 mm size unit in place of 96 x 96 mm cut-out MOUNTING PLATES SMP-147/94 to mount 96 x 48 mm size unit in place of 144 x 72 mm cut-out BOARD THICKNESS BRACKETS / ADAPTORS SPH-07 1 ÷ 7 mm board thickness brackets (2 pcs) standard included with device SPH-05 1 ÷ 5 mm board thickness brackets (2 pcs) SPH-45 1 ÷ 45 mm board thickness brackets (2 pcs) SRH-94 brackets for mounting devices on DIN 35/7.5 or 15 rail (2 pcs) SOFTWARE S-Config 2 is used for the simultaneous detection of devices in multiple Modbus RTU networks and allows user to change the...

Open the catalog to page 3