|
|
|
|
|
|
|
|
|
|
|
FULLY AUTOMATIC 2-COLUMN UNITS COUNTER-CURRENT REGENERATED SERIES DMCE
|
|
|
|
|
|
|
|
• MINIMUM CONSUMPTION OF CHEMICALS
|
|
|
|
|
|
|
|
|
• LOW SILICIC ACID CONTENT
IN PROCESS WATER
• ECONOMIC
AT COMPREHENSIVE
WATER CONSUMPTION
|
|
|
|
SERIES DMCE
A EUROWATER counter-current regener-ated two-column plant has the same ad-vantages as applies to series DME and DMHE. However, series DMCE provides regeneration with approximately half the application of chemicals and produces a similar or improved water quality.
|
|
|
|
COUNTER-CURRENT REGENERATION
During operation the raw water passes through the resin from the bottom of the tank, whereas during regeneration the chemicals are added at the top of the tank. Hereby a highly regenerated zone is creat-ed, which polishes the water.
|
|
|
|
WATER QUALITY
By plant regeneration according to the counter-current principle, a considerably better conductivity is achieved than by co-current regeneration. When using demi-neralised water, high quality demands concerning silicic acid contents are met.
|
|
|
|
|
|
|
|
SPECIFICATIONS - SERIES DMCE
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dimensions Length x Depth x Height mm mm mm
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* 1°GH corresponds to 2.8 mval/l. The capacity per regeneration is calculated by dividing the basic capacity by the salt content of the inlet water measured in equivalent hardness.
Operating pressure: 2.5-6 bar. Water temperature: max. 35°C. (for certain fillings lower). Power supply: 230/12 V, 50 Hz.
|
|
|
|
|
|
|
|
PRINTED IN DENMARK • ZEUNER GRAFISK AS, ÂRHUS
|
|
|
|
|
|
|
|
|
|
|