Catalogue - Wire-actuated encoder - SIKO - (Version JPG)

See other catalogues for SIKO

Draw wire sensor, Linear encoder, Magnetic strip, Magnetic encoder, Draw wire position sensor

Text version of the page

Wire-Actuated Encoder SG120

Robust design with 12 m measurement Length

Electrical data

■ IV58M-0072 encoder type, incremental

Feature Technical data

Additional information


Operating voltage	0 ... 30 V DC at 25 mA without Load
Output circuit	PP
Output signals	AB0
Steps per revolution	2000
Resolution	0.1 mm (10 pulses per mm)
Cable Length (connection)	\|l m with flying Leads
Protection category	IP65
Encoder type WV58M-0007, absolute digital Feature Technical data		Additional information
Operating voltage	0 ... 30 V DC at 40 mA
Interface	RS422/SSI
Steps per revolution	4096 (12bit)
Resolution	0.048 mm (20.48 pulses per mm)
Connection	E2 (connector M12)
Protection category	IP65

3.1

Pin assignment


	IV58M-0004 encoder type, incremental
	Signal	E1
	0/I	\|green
	A	\|yellow
	B	\|white
	GND	gray
	+24 V DC	brown
	WV58M-0007encoder type, absolute digital
	Signal	PIN
	GND	1
	+UB = +10 ... +30 V	2
	Clock +	3
	Clock -	4
	Data +	5
	Data -	6
	RS485 DUA	10
	RS485 DUB	12
	N.C.	7-9, 11

Inkrementalgeber

Jn_rLTLr

_n_

Abstand Referenzimpuls: 200 mm

Pull-out length/Measurement range

The high degree of accuracy provided by SIKO's wire-actuated encoders is due to the fact that the whole wire Length (measurement range) is wound on the drum in onLy a singLe Layer. The comparabLy smaLL diameter of the steeL wire in the SG120 encoder enabLes achievement of the encoder's 6000 mm maximum measurement range using onLy the first drum Layer. More room is required for the Larger diameters of pLastic-coated steeL wire and synthetic paraLine, resuLting in measurement ranges which are accordingLy shorter.

If a reduction in measurement accuracy is accepted, winding in 2 or 3 Layers is aLso avaiLabLe, which aLters the possibLe measurement Lengths accordingLy.

1. layer

3 E

~ +200

steel wire

plastic coated wire

5600

4400

2800

para-line

pre-extension length

max. measuring accuracy

max. extension length

Dimensions indicated in millimeters


Pull-out lengths SG120	1^st layer	2 ^nd and 3^rd layer
Steel wire	6000 mm	12000 mm
Steel wire, plastic-coated	4000 mm	8000 mm
Paraline	2800 mm	5600 mm

Wire-actuated encoder - SIKO - #32

Draw wire sensor, Linear encoder, Magnetic strip, Magnetic encoder, Draw wire position sensor