Catalogue - Rotary Encoder - SIKO - (Version JPG)

See other catalogues for SIKO

Indicator, Rotary encoder, Magnetic encoder, Magnetic strip, Position indicator

Text version of the page

Electrical data


Feature			Additional information
Protocol	SIKONETZ-3	SSI	CAN bus Profibus PB CANopen
Operating voltage	+10 ... +30 V DC	+10 ... +30 V DC	+10 ... +30 V DC +10 ... +30 V DC
Output driver interface	RS485	RS422	CAN high-speed RS485 acc. to ISO/DIS 11898
Current consumption without load (typical)	~0.4 W	~0.9 W	<1.1 W <1.1 W
SSI clock rate		min. 65 kHz (<400 m cable length) max. 1 MHz (<25 m cable length)
Baud rate (kbit/s)	19.2		125, 250, 500, 1000 9.6, 19.2, 93.75, 187.5, 500,1500,3000, 6000, 12000
Short-circuit resistant outputs	yes	yes	yes yes output against output or output against GND in case of short circuit
Inverse-polarity protection on UB	yes	I yes	yes yes
External calibration input	\|no	1 yes	no no
Pin configuration
■ Connector pin assignment E2; SSI interface Signal PIN			Connector pin assignment E12; Profibus interface Signal Signal PIN
GND	1		Profibus-IN Profibus-OUT
+UB	2		N.C. VP (2P5) 1
Clock+	3		BUS-A BUS-A 2
Clock -	4		N.C. DGND (2M) 3
Data +	5		BUS-B BUS-B 4
Data -	6		N.C. screen 5
RS485 DUA	10
RS485 DUB	12
N.C.	7-9,11		Connector pin assignment E12; interface CAN bus Signal Signal PIN CANopen-IN CANopen-OUT
^ Connector pin assignment E2; SSI interface wth external calibration input
			N.C. N.C. 1 N.C. N.C. 2
Signal	PIN		CAN_GND CAN_GND 3
GND	1		CAN_H CAN_H 4
+UB	2		CAN_L CAN_L 5
Clock+	3
Clock -	4
Data +	5		Connector pin assignment E12; power supply
Data -	6		Power supply PIN
External calibration input	8		+UB 1
RS485 DUA	10		N.C. 2
RS485 DUB	12		GND 3
N.C.	7, 9, 11		N.C. 4

2.1

Connector pin assignment E4; SIKONETZ-3 interface

Signal_PIN