position indicator - SIKO - #28

Text version of the page

[1] [2] Sense of rotation 02 04 Fitting position 1 2 3 4 1.2 1.3 1.4 1.5 1.6 1.1 1.0 1.7 1 PositionLine | 1.2 Electronic digital position indicators www.siko.de Mounting position Two factors determine this feature: a) The orientation of the machine shaft b) Display viewing direction The number and orientation of the LCD display and the reading direction in the display are determined with a numeric code (e.g., 02, 04, etc.). Sense of rotation The sense of rotation of the axis influences the parameters programmed in the devices. Digital position indicators are available in two directions of rotation in relation to the machine axis: “i“ stands for clockwise “e” stands for counter-clockwise Ascending values are shown on the display in accordance with the “i” and “e” ordering code. Mounting the torque support The radius of the shaft is added to the space measurement between the hollow shaft and torque shaft. This measurement is marked on the mounting surface with a slide gauge and scriber, then center-punched and drilled (for the drilling diameter and depth, refer to the technical drawings). With correct predrilling, stress-free mounting of the position indicator must be possible. Locking on the shaft Only the set screw is screwed in and tightened to achieve a positive connection with the shaft. Torque support (2 versions) On all electronic position indicators you have the choice between two different designs: [1] Either the pin belonging to the housing or [2] an additional umbrella. The umbrella is an optimum solution for compensating for mounting tolerances. Electronic digital position indicators Technical details “+” shows the direction of rotation of the respective machine shaft. The ordering codes “e” and “i” specify in which direction of rotation the increasing values appear on the display. 28