101 2.590
ø5.2 ø75 2542 ø3.5ø6 1
174 5010
35 strippedand tinnedcable length L aktive measuringsurface sreening braid drilled and tinned array sensor / ring for reference signal R
Features:
Scaling factor Circumferential speed v [m/s]
15
max. â– â– â–
â– â– insensitive to dust, shavings, humiditymaximum resolution 0.002°, system accuracy ±0.1°
real-time processingrotary encoder system with IP67 protection class(in combination with MR500)
fixed index signals
Contactlessly measuring sensing unit with integ-rated interpreting electronics and digital signal
output. Used in conjunction with the MR500 ma-gnetic ring the magnetic sensor forms an open androbust measuring system.
2500.10.20.40.81.73.46.913.8 1250.20.40.81.73.46.914.525 1000.30.51.12.24.591825 62.50.40.81.73.46.914.52525 500.51.12.24.59182525 251.12.24.5918252525 Pulse interval [t in µs] 321684210.50.25The circumferential speed results from the selected pulse and the correspondingscaling factor. (see appendix) FeatureOrdering dataTechnical dataAdditional information Supply voltage 424 V DC ± 20 %standard, with polarity protection 55 V DC ± 5 % Connection/cable length E1/2.02 m cable, flying leadsstandard (max. cable length = 20 m) E6, E8E6, circular plugE8, DSUB 9-pol. Output circuit PPpush pullstandard LDline driverRS 422 Reference signal Owithoutstandard Iindex periodical Rindex fixed Scaling factor 250factor 250standard , option 125 /100 / 62.5 / 50 / 25 Pulse interval 11 µsstandard
FECABD
, option 32 / 16 / 8 / 4 / 2 / 0.5 / 0.25 Power consumptionmax. 70 mA@ 24 V DC unloaded Output signalsA, /A, B, /B, option: I, /I or R, /Rquadrature signal Gap ring / sensor0.1–2.0 mm, reference signal R 0.1-1.5 mmlateral offset ± 2 mm, for reference signal R ± 0.5 mm System accuracy± 0.1°repeat accuracy ± 1 increment Circumferential speedsee tablemax. reference signal 5 m/s Interference protection class3, acc. to IEC 801humidity: 100 % rF, condensation permissible Temperature rangesworking temperature: -10 ... + 70 °Cstorage temperature: -30 ... + 80 °C Protection classIP67 acc. to DIN 40050 (casing)test mark CE Housingblack plastic CablePURNote: The internal translation module can generate rapid counting pulses whose length is limited by the pulse interval. The follower electronic must be adjustedaccordingly. If necessary select the pulse interval in advance. For supply voltage 4 and output circuit LD it is necessary to use a terminating resistor of 470 Ohmto prevent themal stress. Your order:––––––
MSK500/1 A B C D E F