| | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | | | |
| | | |
| | | Calibrating with every convenience | | |
| | | |
| | | king more cost-effectively, safely and reliably in the range from -30°C to 650°C | | |
| | | |
| | | Thermometers, thermocouples and other temperature sensors are subject to mechanical, thermal and chemical stresses especially in industrial use. This leads with increasing time to a drift that is not predictable. | | Switchable languages German English | | |
| | | French | | Spanish | | |
| | | |
| | | |
| | | |
| | | Since the temperature in industrial processes has become one of the most important indicators of quality, operating safety and service life, the calibration of temperature sensors on site has achieved special importance. Inaccurate temperature measurements reduce product quality, increase the risk of failure and lead to increased energy consumption. Only the regular calibration of the sensors provides information on the difference between actual and measured temperature and thus makes the specific drift behaviour visible. | | |
| | | Our easy to transport and sturdy calibrators with laboratory accuracy for all areas of application: • In test bays and development laboratories, temperature sensors have to be tested, adjusted or recalibrated before installation. • In sensor production, tolerances of thermocouples and resistance thermometers can be determined and documented clearly only by calibration. | | |
| | | |
| | | |
| | | I(iim\ A guarantee of 5 years is grant to all TP 38 000 which are calibrated and tested at least once per year by the \^C7/ SIKA DKD laboratory. | | |
| | | |
| | | -2- | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | |