LB-2000 strapping machine - SIGNODE - #2

Text version of the page

SIGNODE LB2000 Automatic Strapping Machine Type Strap Size Break Strength Meters/Coil (width x gauge) (Newtons) 109W 5 x .42 mm 450 6000 114W 5 x .50 mm 600 5300 SP212 6 x .46 mm 890 5105 Design, function and operation The LB2000 automatic strapping machine is used for general packaging applications. The machine is operator controlled and applies polypropylene straps to various sized products, envelopes, bundles and cartons. The strapping head is driven by a cam shaft and requires no adjustments. It is very reliable in use and simple to operate. The built in foot pedal allows the operator to easily initiate the strap cycle whilst positioning and holding the product with both hands. The machine is equipped with a unique strap misfeed prevention system. In case a strap is applied without a package, the loop ejector prevents a strap jam. Even when a package is deliberately placed on top of the strapped anvil, the operation of LB2000 is not effected. The LB2000 incorporates a unique access guide system providing the operator with full access to the strap path, reducing down time. Simply by opening three quick release access guides, the entire strap path is fully accessible. An automatic strap feeding system and quick-release dispenser side flange enables the rapid changing of strap coils, reducing down-time to an absolute minimum. In case of an uncompleted strap feed, the machine corrects itself by automatically taking up and refeeding the strap into the machine. An ITW Company P253 E 10/00 © Signode 2000 Printed in the U.K. Options  Remote cycle switch for initiating the strap cycle by hand. The strong magnetic backing allows the switch to be placed in a convenient position.  Electric photo cell for automatically triggering the strap cycle. A switch enables the operator to select one strap, continuous strap or no strap mode.  400 V, 3 phase option. Technical Data Strapping Head System LB2000 cam driven head Sealing Method Heat seal Strap Tension Infinitely adjustable up to 250N Strapping Signal Manually by foot switch Cycle Rate up to 52 cycles per minute Power Supply 220/240 V, single phase Power Consumption 1.4 kW Max Package Sizes 600 x 400 mm or 730 x 400 mm Control Voltage 24 Volts DC Control System Siemens S7-200 Standard Table Height 865 mm Minimum Pack Face 60 mm Machine Weight 245 kg Machine Finish Machine Panels RAL 6000 green Strapping Spares and Service A comprehensive consumables, service and parts back-up is available at Signode locations throughout the world. Models The LB2000 is suitable for use with either 5 mm or 6 mm Polypropylene strap. Two models are available for strapping the following max. packaging sizes:  600 x 400 mm  730 x 400 mm. for increased productivity and reduced costs EASY TO OPERATE A large foot pedal enables the operator to initiate the strap cycle whilst positioning the product with both hands. JAMLESS STRAPPING TECHNOLOGY A unique strap jam prevention system offers the highest reliability. AUTOMATIC STRAP LOADING The strap end is inserted into the loading slot and is automatically fed into the head, chute and accumulator box. VARIABLE STRAP TENSION The required tension level can be easily set by turning a dial on the outside of the LB2000. A separate switch allows the operator to quickly change over into a low tension mode. 865 1385 max 840 510