Catalogues - anechoic-chamber-hermes-10

Catalogue anechoic chamber Hermes 10

www.siepel.com

Page

/ 4

Where to buy
this product ?

/ 4

See other catalogues for SIEPEL

Text version of the page

HERMES 10 10 m EMI CHAMBER

Siepel

Michael Faradays Heritage

RADIATED EMI TESTING

SIEPEL HERMES 10 chamber is designed to perform full compliance radiated EMI testing according to the 'following standards: EN 50147-2, ANSI C63.4, EN 55011, CISPR 11, EN 55016, CISPR 16, EN 55022, CISPR 22, 'from 30 MHzto18GHz.

Site VSWR (1-18 GHz):<6 dB


EMI (Electroma		gnetic Interference)
			From 1 GHz to 18 GHz
Applicable standards	EN 50147-2, A 55011, EN55( CISPR 16 ...	vNSI C63.4, EN 316, EN 55022,	CISPR 16
Height of Tx antenna	Essaus		Horizontal: 1.36 m, 2.36 m Vertical :1.36 m, 2.36 m
			1.36 m and 2.36 m
Measurement distance			3 m
Polarization			Horizontal and vertical
Measured position of Tx antenna	Tx antenna to positions (cen right)	be located in four re, front, left and	Tx antenna to be located in four positions (centre, front, left and right)
Working volume	Diameter: 3 m	/ Height: 2 m	Diameter: 3 m / Height: 2 m (0.36 m above ground plane)
Remarks	Test with meta	llic ground plane	16 HYFRAL APM 66 Absorbers on the floor
Max. deviation	±4dBfrom NJ	SA value	< 6 dB Site VSWR

RADIATED EMS TESTING

frequency range from 26 MHzto 18 GHz.



Applicable standards

Measurement distance
Field Generation Antenna	Biconical/ Log	Per or broadband antenna
Rx antenna	Broadband iso 1,5x1,5m, lo	tropic probe, 16 positions, measured area of cated 0,8 m -2,3 m over the floor
Polarization
Remark	Test with 16 A	PM66 absorbers on the floor
	+0 to +6dBfo	' 75% of the 16 measured points

3/4

SIEPEL SAS - ZA de Kermarquer - BP 87- 56470 La Trinité-sur-Mer FRANCE Ph.+33(0)2 97 55 74 95- Fax +33(0)2 97 55 84 55 -www.siepel.com Contact : v.kevser@siepel.com - s.iegat@siepel.com