| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | © Siemens AG 2007 | | |
| | | |
| | | SITRANS P measuring instruments for pressure | | |
| | | |
| | | Valve | | nifold combination DN 8 | | |
| | | |
| | | I Characteristic curves | | |
| | | Selection and Ordering data | | Order No. | | |
| | | 2 | | |
| | | |
| | | |
| | | |
| | | Valve manifold combination DN 8 for vapors for flanging to pressure industrial transmitters for differential pressure, with mounting plate, max. working pressure 420 bar, also available in stainless steel on request (order accessory set with Order code) • without test connection • with test connection M20 x 1.5 Constructional and acceptance test without certificate with factory test certificate EN 10204-2.2 with material acceptance test certificate • EN 10204-3.1 • EN 10204-3.2 further acceptance conditions by arrangement | | F) 7MF94 1 6 - ■■■ | | |
| | | |
| | | |
| | | bar 400 300 200 100 | | |
| | | | | |
| | | 1 Valve manifold 2 Blow-out connection | | |
| | | |
| | | 4C 4D | | |
| | | |
| | | |
| | | |
| | | 0 100 200 300 400 500 °C Operating temperature | | |
| | | A B D E | | |
| | | |
| | | Permissible operating pressure as a function of the permissible operating temperature | | |
| | | |
| | | ■ Dimensional drawings | | |
| | | |
| | | |
| | | diam. 14 | | |
| | | |
| | | |
| | | Selection and Ordering data | | Order code Order No. | | |
| | | |
| | | |
| | | Further designs1 Please add "-Z" to Order No. and specify Order code. | | |
| | | |
| | | Accessory set to DIN2' (required for flanging, weight 0.2 kg) | | |
| | | |
| | | 4x screws M10x55 to DIN EN 24014; B16 F) 7MF9010-6CC chromized steel 4x washers 0 10.5 mm to DIN 125; 2x O-rings to DIN 3771, 20x2.65 - S - FPM90, max. permissble 420 bar, 120 °C Flange connection to DIN 19 213 only permissible up to PN 160! Accessory set to EN (required for flanging, weight 0.2 kg) 4x screws 7/16-20UNF x B34 F) 7MF9410-5CA 21/8 inch to ASME B18.2; chromized steel 2x O-rings to DIN 3771, 20 x 2.65 - S - FPM90, max. permissble 420 bar, 120 °C | | |
| | | |
| | | - 72 155 | | |
| | | 1) When ordering accessory set together with the valve manifold combination, please use Order code; otherwise use Order No. 2) Flange connections to DIN 19213 only permissible up to 160! F) Subject to export regulations AL: 9I999, ECCN: N. | | |
| | | |
| | | AProcess connection (e.g. on primary device): Welding pin B Transmitter connection: Flange connection to EN 61 518, form A C Blow-out connection: Pipe union with ferrule, diameter14mm, S series to DIN 2353 CTest connection (onlywith Order No. 7MF9416-4D.): M20X1.5 Valve design: Manifold valves: internal spindle thread Blow-out valves: external spindle thread Valve manifold combination DN 8 (7MF9416-4..), dimensions in mm | | |
| | | |
| | | Accessories | | |
| | | |
| | | for valve manifold combination DN 8 for | | |
| | | |
| | | flanging • B16: 4 screws M10x55 to DIN EN 24014, 4 washers, 2 O-rings (FPM 90) • B34: 4 screws 7/16-20 UNFx 21/8 inch to ASME B 18.2.1, 2 O-rings (FPM 90) Washers 0 10.5 to DIN 125 O-ring to DIN 3771, 20 x 2.65 - S - FPM90, max. 420 bar, 120 °C Note: M10 screws only permissible up to PN 160! | | |
| | | |
| | | I Schematics A | | |
| | | A | | |
| | | |
| | | |
| | | A Processconnection B Transmitter connection C Blow-out connection D Testconnection | | |
| | | Valve manifold combination for vapors | | |
| | | y t B c | | |
| | | |
| | | |
| | | |
| | | Valve manifold combination DN 8, connections | | |
| | | |
| | | 2/204 | | |
| | | Siemens FI 01 • 2008 | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |