| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | © Siemens AG 2007 | | |
| | | |
| | | SITRANS P measuring instruments for pressure | | |
| | | |
| | | For gage, absolute and differential pressure | | |
| | | |
| | | • Clamp connection - 11/2 inch - 2 inch - 21 inch - 3 inch For differential pressure and flow • To DIN 11851 with slotted union nut -DN50 -DN65 -DN80 • To DIN 11851 with threaded socket -DN50 -DN65 -DN80 • Clamp connection - 2 inch - 21 inch - 3 inch | | |
| | | Overview | | |
| | | 2 | | |
| | | |
| | | PN 40 PN 40 PN 25 PN 25 | | |
| | | |
| | | |
| | | PN25 PN25 PN25 PN25 PN25 PN25 PN 40 PN 25 PN 25 | | |
| | | Quick-release diaphragm seals, to DIN 11851 with slotted union nut | | |
| | | |
| | | |
| | | Sealing face • For stainless steel, mat. No. 1.4404/316L • For the other materials | | |
| | | To EN 1092-1, form B1 or ASME B 16.5RF 125 ... 250 AA To EN 1092-1, form B2 or ASME B16.5 RFSF | | |
| | | |
| | | |
| | | Materials • Main body • Wetted parts • Capillary • Sheath | | |
| | | Stainless steel 316L Stainless steel 316L Stainless steel, mat. No. 1.4571/316Ti Spiral hose made of stainless steel, mat. No. 1.4301/316 | | |
| | | Quick-release diaphragm seals, with clamp connection Quick-release diaphragm seals are available for the following SITRANS P pressure industrial transmitter series: • For pressure: MK II, DS III, DS III PA, DS III FF • For differential pressure and flow: DS III, DS III PA, DS III FF The quick-release remote seals are common designs in the food industry. Their design means that the measured medium cannot accumulate in dead volumes. The quick-release clamp present on the remote industrial seal means that quick dismounting is possible for cleaning. | | |
| | | |
| | | |
| | | Maximum pressure Tube length Capillary • Length • Internal diameter • Minimum bending radius | | See above and the technical data of the pressure transmitter Without tube | | |
| | | |
| | | Max. 10 m (32.8 ft), longer lengths on request | | |
| | | |
| | | 2 mm (0.079 inch) 150 mm (5.9 inch) | | |
| | | |
| | | ■ Technical specifications | | |
| | | |
| | | |
| | | Filling liquid | | Food oil (FDA listed) Glycerin/water (not suitable for use in low-pressure range) | | |
| | | Quick-release diaphragm seal | | |
| | | |
| | | |
| | | Connection, nominal diameter Nominal pressure For pressure • To DIN 11851 with slotted union nut -DN 25 PN 40 -DN 32 PN 40 -DN40 PN40 -DN50 PN25 -DN 65 PN 25 -DN80 PN25 • To DIN 11851 with threaded socket -DN25 PN40 -DN32 PN40 -DN40 PN40 -DN50 PN25 -DN65 PN25 -DN80 PN25 | | |
| | | |
| | | Dependent on the pressure transmitter and the filling liquid of the remote seal More information can be found in the technical data of the pressure transmitters and in the section "Technical data of filling liquid" in the Technical description to the remote seals | | |
| | | Permissible ambient temperature | | |
| | | |
| | | |
| | | Weight | | Approx. 4 kg (8.82 lb) | | |
| | | |
| | | Certificates and approvals Classification according to pressure equipment directive (DRGL97/23/EC) | | |
| | | For gases of fluid group 1 and liquids of fluid group 1; complies with requirements of article 3, paragraph 3 (sound engineering practice) | | |
| | | |
| | | |
| | | |
| | | 2/160 | | |
| | | Siemens FI 01 • 2008 | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |