Catalogues - siemens-measuring-instruments-for-pressure

Catalogue Siemens - Measuring instruments for pressure

Page

/ 222

/ 222

Text version of the page

SITRANS P measuring instruments for pressure Transmitters for gage, absolu^^^gf^f|^^

Selection and Ordering data Order code


*Additional data*		HART	PA	FF
Add "-Z" to Order No. and specify Order code.
Measuring range to be set Specify in plain text:
• With linear characteristic (max. 5 digits): Y01: ... up to ... mbar, bar, kPa, MPa, psi	Y01	Y
• With square-rooted characteristic (max. 5 digits): Y01: ... up to ... mbar, bar, kPa, MPa, psi	Y02	Y
Measuring point number (TAG No.)	Y15	Y	Y	Y
Max. 16 char., specify in plain text: Y15:
Measuring point text	Y16	Y	Y	Y
Max. 27 char., specify in plain text: Y16:
Entry of HART address (TAG)	Y17	Y
Max. 8 char., specify in plain text: Y17:
Setting of pressure indicator in pressure units Specify in plain text (standard setting: mA): Y21: mbar, bar, kPa, MPa, psi, ...	Y21	Y	Y	Y
Note: The following pressure units can be selected: bar, mbar, mm H₂O⁾, inH₂O⁾, ftH₂O⁾, mmHG, inHG, psi, Pa, kPa, MPa, g/cm², kg/cm², Torr, ATM oder % ) ref. temperature 20 °C
Setting of pressure indicator in non-pressure units	Y22¹⁾+ Y01 or Y02	Y
Specify in plain text: Y22:.....up to.....l/min, m³/h, m, USgpm, ... (specification of measuring range in pressure units "Y01" or "Y02" is essential, unit with max. 5 characters)	Y22¹⁾+ Y01 or Y02
Preset bus address Specify in plain text: Y25: .....................	Y25		Y

Only "Y01", "Y21", "Y22", "Y25" and "D05" can be factory preset

S = available

¹⁾ Not together with over-filling safety device for flammable and non-flammable liquids (Order code "E08")

2/107

Siemens FI 01 • 2008