Seamless measurement without interruption HVAC and Power Solutions

FUE1010: Energy, dedicated and portable. Highly accurate thermal energy sub-metering and efficiency monitoring.FUE1010 IP65 (NEMA 4x), FUE1010impact resistant IP40 (NEMA 1), FUE1010 portable IP40 (NEMA 1) Heating and cooling applications include: Chilled water sub-metering Hot water sub-metering Condenser manufacturer water Potable water Ammonia and glycol Diesel and fuel oils Checkmetering River and lake water Lake source cooling 6 SITRANS FUE1010 clamp-on ultrasonicenergy meters, avoid the performance and reliability problems that afflict conventional intrusive thermal energy flowmeters. Its high accuracy, wide bi-directional rangeability, and high sensitivity prevent the loss of energy cost billing now suffered when flow rates fall below the operating range of intrusivemeters. Absolutely no pressure drops means lowest operating costs. Installation is quick and easy; shutdown is never needed for instal- lation, maintenance, or calibration check, saving additional cost and inconvenience. Non-intrusive, clamp-on “no-wear” flow sensing delivers intrinsic high reliability. Ideal for a wide range of district energyheating and cooling applications andfor power plants. Dual channel models can be configured to measure two different pipes, or to apply the second channel as a dual path for applications with convoluted piping configurations. The two channel meter can measure both chilled water and hot water in one enclosure. In some cases chilled water/glycol mixes can foam, causing the transit-time technology to fail. In a case like this adual channel system with both transit- time and doppler transducers can be installed on the same line to provide seamless measurement without any interruptions. The FUE1010 can also become a remote industrial communication module by accepting 4–20 mA inputs from other data sources, such as for electrical KW load, pressure and steam flow. This information is integrated into its built-in datalogger and allows you to time-stamp all data and down- loads it for your billing, efficiency, and operation analysis.SITRANS FUE1010 portable meters areareliable source for checking your existing meters. They can also be used for surveys of HVAC applications that are not being metered. These portable units can be left in place to track the usage of both your flow and BTU measurement, and then supply a test report upon completion of the survey. Whether it is installation, managingoperations, or verifying continuous accuracy customers rely on Siemens for the best energy measurement possible.